My New Project 99' sonoma

[quietflight6787]

Well I picked up a 99 sonoma single cab for $700, put a new head on it, runs good. Im not new to the minitruck thing, but new to air ride.. Can someone help me out and kind of explain 2 link and 4 link stuff? also what would happen if I were to just c-notch the frame and just do bags on the axle to the frame? How would the ride quality be and how about safety? anyone who would like to chime in and help me out that would be awesome! Thanks again!

[DimeonDubs]

i would personaly do a 3 link from suicide doors,you can get them bolt in now so its good for a quick install,or just get the SD backhalf, includes everything for only like 1600..and i think you asking about just mono leafing it?? if so, dont do that,i had mine monoed for awhile and it doesnt ride to great and the springs have a chance of snapping(mine did),lucky for me i was only going like 5 mph..hope i helped a little

[quietflight6787]

thanks for your input, but whats the difference betsween using 2,3,4 link and so on?

[DimeonDubs]

thanks for your input, but whats the difference betsween using 2,3,4 link and so on?

the 2 link is kind of like the leaf springs,only attaches on the bottom of the axle,nothing on top,alot of people dont like them..but if set up correctly they seem to work fine,but as far as i know they have to be custom fabbed for s-10s

the 3 link has the lower links like the 2 link,but also has a wishbone link in the middle of the axle on top,another advantage is you can get them bolt on for s-10s

4 link is the old standard,from what ive seen you need to relocate the gas tank to use them though in s10s..but they have been around forever,and everyone seems to like them

hope that helped,let me know if you have any other questions

[quietflight6787]

makes sense, I am probably just going to go with a two link to start off, only because I dont need a drastic drop or anything to hop,

now with a two link say that went from axel to the leaf mount, where the shock be located? or do I even need to run a shock?

[DimeonDubs]

im not 100% on a 2 link, but think you can either run them off the link bars to the frame,or off the rear of the axle up to the frame

[quietflight6787]

and whats it do stop side to side motion while drive and like driveshaft chatter?

[Paul]

skip the 2 link...3 or more only...and all the info you will ever need for the dime is on S10forum.com

[DimeonDubs]

and whats it do stop side to side motion while drive and like driveshaft chatter?

yeah the shocks just stop it from bouncing so much,ive run without them before and its not to bad..just a little bouncy around corners

[killerMikeD]

I would run shocks, and 8 valves minumum, anti sway bars are ok to leave off, you get too much body roll from air transfer and bouncing from no shocks, and 4 valves

[mike mcginnis]

ohh shit Mikes In the house!! what up mike hey man im back in town shoot me a PM

[DimeonDubs]

ohh look its mike mcg.. now we got a mini-truckin OG in the house

[mike mcginnis]

haha i got out of minis a couple years ago, but id love to have a slamemd fullsize.