Hubba Hubba

[FearThe4Doors]

http://www.tsplace.com/neon/MVC-301S.JPG

More here:
http://www.tsplace.com/neon/

Engine/Drivetrain
8.8: 1 Forged JE Pistons (.020 over)
Crower 4340 Billet Rods with full floating pins
Crankshaft balanced and nitrided
Total Seal Rings
Ported Mitsubishi Super 20 G turbocharger – Coating by Jet Hot
Hahn RaceCraft Turbo Piping and Intercooler – Sterling Jet Hot Coated
Moroso Oil Pan
AFX Manufacturing Underdrive Pulley
AFX Manufacturing 56mm Ported Throttle Body
Porting Services by Darrell Cox/Team Phatridz
62 lb RC Engineering Balanced Injectors
Under Pressure Research Custom Fuel Rail
Crane Cams Turbo Camshafts
Crane Valve Springs w/Titanium Retainers
AEM Adjustable Cam Gears
Mopar PT Cruiser Rockers/Lash Adjusters
Paxton Signature Series Fuel Pump
Paxton EFI Fuel Regulators (2)
Accel High Pressure EFI Pump
Accel DFI Programmable Engine Management
Crane HI6-DI2 Electronic Ignition
Crane Electronic Crank Trigger Module
Crane Boost Proportional Retard System
Greddy Profec-B Boost Controller
Greddy Type S Blow Off Valve
Autometer Boost Oil Fuel/Air Fuel Pressure Gauges
Earl’s Performance AN fittings/Braided Hose
Nitrous Works Nitrous System
Moroso Battery Box and Battery Cabling Optima Battery
ClutchMasters Stage IV Clutch
Quaife Positraction Differential
DriveShaft Shop Stage III Axles and Wheel Hubs

Oh yeah one more thing... anyone got $17500 I can borrow?? :)

[CrazyMoparGirl]

thanks alot now im crying for selling mine oh well I guess Ill have to buy another one good thing I still have the engine

[FearThe4Doors]

Wanna buy a built dodge spirit? Im having this HUGE internal conflict right now between keeping that car or building a 4g63. I really dont need both and i should do the 340 before the 4g63... but lately theres been tons of talk on the FMML about high rpm/high hp/low torque engines and its not helping me at all! Then to add to it I have the BEAUTIFUL DOHC 16v 2.0L Head in the back of my car that I was forced to look at all night long!! ITS NOT FAIR!!!!!!!!!!!

[CrazyMoparGirl]

LMAO Let me pay off the Omni first then we will talk about the Spirit.

[FearThe4Doors]

Im reposting what I just did in the Mitsy forum.. Maybe ill get some more input from you guys....

:confused:

[CrazyMoparGirl]

You do realize that the Mitsu 2.0L is completely backwards from the Dodge one right?

[FearThe4Doors]

yep read my latest post in there

[rb70383]

Originally posted by "Someone"

Originally posted by FearThe4Doors
yep read my latest post in there

STAY DOMESTIC YOU WANNA BE TRADER!!!


:haha: What about this. What was does a old bug motor turn. Is it backwards like a mitsu? If so a Vedub transaxle in the trunk of an omni some welding and you might come out with a twin engine AWD Omni. Just an idea.

[FearThe4Doors]

I know Bob. And I feel bad about straying from Dodge. But Im not eat shit & die Dodge. Im whatever is my interest. And I just cant deny the excellence of these engines. Hondas are good too but i will never do one of them b/c of how sold out they are right now. The 2.0 is the right mix of popularity and potential. The only thing i could do to save a little face is to use a DODGE colt for the body.... :(

[rb70383]

HMM A dodge colt. Alright you can stay since I want a 77 Dodge colt real bad. (gotta be a tudor) The new Mopar midget block 833 8 3/4 you get the idea.:evil2:

[FearThe4Doors]

Originally posted by "Someone"

Originally posted by rb70383
HMM A dodge colt. Alright you can stay since I want a 77 Dodge colt real bad. (gotta be a tudor) The new Mopar midget block 833 8 3/4 you get the idea.:evil2:

Im thinking more of an 89-91 colt.. hehe
Sounds like that buildup would be pretty crazy Bob! I love it!! Heheheheheh
Whats an 833 from? Are those the factory ones for the colts?
You know what would be even crazier... one of those 88ish D50 Rams... made by Mitsy. Those are tiny yet have some beefy drivetrain parts.

[rb70383]

A833 - the Chrysler 4-speed. Sorry about that. A little d50 would be neat also. Hemi in bed. :bounce:

[CrazyMoparGirl]

Now now boys its ok if Jeff wants to build a Itsy Bitsy Mitsy We will just have to call him Little Miss Muffet. Hahahahahahaha Its ok I dont mind losing a Domestic owner to the imports after all we wont be able to offer assistance to him with car stuff.

[rb70383]

True. Even if we could offer advice we would have to stop and let him catch up first. :haha::haha:

[FearThe4Doors]

Originally posted by "Someone"

Originally posted by rb70383
HMM A dodge colt. Alright you can stay since I want a 77 Dodge colt real bad. (gotta be a tudor) The new Mopar midget block 833 8 3/4 you get the idea.:evil2:

here Bob
http://cgi.ebay.com/ebaymotors/aw-cgi/ebayISAPI.dll?ViewItem&item=600375831&r=0&t=0

[CrazyMoparGirl]

JEFF YOU SUCK!!!!!!!!!!!! If only we had the cash flow damn damn damn But JOE that would be a BAD AZZ car to have and wouldnt ya know t just hapens to be in NY north of Ft Bragg.

[FearThe4Doors]

:evil2:
Dont under estimate Itsy Bitsy Mitsy Boy!!
hehehehe

BTW there was some big tank car at Cophers today with a big block of some sort in it. Either 383 or 440 i guess. Im going back tomorrow I can look closer if you like

[rb70383]

Yip I learned how to drive a stick and how to drive all at once in one of those cars. http://www.dreamwater.com/mirage1/pictures/domingo/DSC00031.jpg
http://www.cwl.com/bensrallypage/forsale/engstrom_colt.jpg
HEY LMK if you find a 77 4 speed 2 door colt down there. I have permission to go hunting for one. :evil2: (fires up torch)

[FearThe4Doors]

Okie