JDM Up's shop car

[richcon]

Mike Puma and his best friend Brad Randall bought a MINT bone stock 98 gsr a few years ago and began to build it. Together they were working on a few projects and Brad really wanted to begin to build an s2k so Mike took over the work on the teg and decided to make it his sole focus. Thats where JDM UPS came in. In all his builds the number one issue Mike ran in to was finding quality shops to get rare high end parts from. We immediately saw room here for a great partner ship and decided to make his car our shop car. The car has gone through a couple make overs some more drastic than others, but its a constantly changing project car that really depicts what the JDM style is all about. Together we have reached a level that both Mike and us at JDMUps.com can be proud of. All of our hardwork will soon be displayed in an upcoming issue of Honda Tuning. So keep your eyes open for it. If you like any of the parts that are on the car be sure to let us know because we can get any of them for your car too, along with much more!


Here is the car in its purest stage, 25k original miles, new 18g greddy kit and new Work Emotions:
http://i51.photobucket.com/albums/f388/richcon/8old1.jpg
http://i51.photobucket.com/albums/f388/richcon/9old2.jpg
http://i51.photobucket.com/albums/f388/richcon/16old9.jpg




Then we decided to add a few mugen goodies like the S1 bucket, Gen 1 wing, twinloop exhaust, and few other things.
http://i51.photobucket.com/albums/f388/richcon/14old7.jpg
http://i51.photobucket.com/albums/f388/richcon/10old3.jpg




Then we decided to go Spoon, so we switched the s1 for the kevlar bucket as it went better with the kevlar pannels.
http://i51.photobucket.com/albums/f388/richcon/2-7.jpg
http://i51.photobucket.com/albums/f388/richcon/1-5.jpg





Then more recently we decided to go big or go home, and decided to do the jdm front conversion, new steering wheel, harness, and the super rare racing hart cp8's. We also added the spoon n1 exhuast to go with the seat, valve cover, spark plug cover and Carbon hood.
http://i51.photobucket.com/albums/f388/richcon/6-5.jpg
http://i51.photobucket.com/albums/f388/richcon/7-5.jpg
http://i51.photobucket.com/albums/f388/richcon/4-5.jpg
http://i51.photobucket.com/albums/f388/richcon/12old5.jpg



Mod list:



Internal:

Mugen low temperature Thermostat



Externals:

Full Greddy 18g turbo kit

RC 440cc injectors

Walbro 255 fuel pump

K&N air filter

Greddy Type S BOV

Greddy type 31 FMIC

Denso iridium spark plugs

NGK spark plug wires

B&M fuel pressure gauge

AEM pulleys

Omni Power test pipe, TIG welded

Mugen Twin Loop cat back exhaust

Mugen oil cap

Mugen high-pressure radiator cap

Spoon Sports magnetic oil and transmission drain plugs

Spoon Sports aluminum radiator stays

Spoon Sports titanium bolts

Spoon Sports heat barrier tape

Spoon Sports Valve cover

Spoon Sports carbon Kevlar spark plug cover



Engine Management:

Chipped P28 ECU

Hondata s200 with boost control option

Blitz SBC-ID



Drivetrain:

5-speed Gsr transmission

Spoon Sports Clutch (clutch cover, street friction disk)

Spoon Sports 4.2 Kg flywheel

Spoon Sports release bearing



Suspension:

Front- Tokico Illumina 5-way adjustable shocks

Tokico springs

Rigid type 2 triangulated strut brace



Rear- Tokico Illumina 5-way adjustable shocks

Tokico springs

Rigid type 1 strut brace

22mm OEM Integra Type R rear sway bar with BSQ mounting kit



Wheels:

17’’ Discontinued Racing Hart Cp8’s (white)

Work RS locking lug nuts (blue)



Tires:

Falken Azenis 205/40/17



Body:



full JDM Front end conversion
Spoon carbon hood
oem jdm front lip




Interior:

Spoon carbon kevlar bucket seat

Real carbon kevlar door pannel inserts ( only dc2 in the country with this product)

Mugen racing pedals

Greddy turbo and EGT gauges with cups

Blitz power meter ID

TWM performance weighted shift knob



We have reacently teamed up with another company aswell to once again add a few more goodies and different interior which will be displayed for the first time at our car show on May 17th. We hope you like our work, and look forward to working with you. Becuase at JDMups.com your passion, is our passion.


A note from the owner:
Guys, my car would not be where its at with out the help of jdmups.com. As you can probably tell I like to change my mind and switch things up alot. I like rare parts, stuff that no one else has, and jdm ups was able to find me everything i needed quickly and at a fair price. I was in desperate need of a shop like this and i was lucky to find these guys. I know there are a million places to source parts but most are hard to deal with, over priced, and take forever. Not jdmups.com. Please dont take my word for it give Greg a call and just see what they can do for you, you wont regret it.

[richcon]

More pics to come

[kaluwa]

Good stuff guys, car looks great. What issue of Honda Tuning will this be in?

[richcon]

As far as Im told it will be with in the next two issues.

The car is going in for a second photo shoot this Friday.
Ill keep every one posted!

[Liquid]

sweet

[Shadytrixta1]

sweet! how much power does the greddy kit produce?

[KrazyRider83]

i remember that car...def one clean teg ^^^ & what he asked

[blkgsr-t]

hey guys thanks for the comments, i am the owner of the car..the kit produced 260whp, and 230lbs tq at 12 lbs of boost. Im getting it retuned soon and will update those numbers...and as far as the Honda tuning issue it is still TBD, we were shooting for the may issue but the editor did not like the background at one of the locations so we have to re shoot now so depending on how fast that gets done will determine the issue becuase the mag is usually 3 months out...we will keep you updated.. thanks

[KrazyRider83]

nice...& good luck

[richcon]

thanks Mike ^^

[kumar.]

Lookin good, clean Integra!

[richcon]

we appreciate that buddy

[JDM son!]

soooo clean, i still want that valve cover!

[blkgsr-t]

hahha you cant have it!...unless you buy it from JDM ups!!!!

[K24_ELEMENT]

thats so clean.
great job

[blkgsr-t]

thats what jdm ups is all about

[sspem2]

i hope u repped team ssp in your HT spread :bigthumb: im next. :evil2:

[L3GITIMATE]

nice job jdmups

[DSM Dave]

Sweetness

[blkgsr-t]

thanks for the comments guys and make sure that when you go to order your next part you come through us!

[L3GITIMATE]

ily gregory

[blkgsr-t]

*** Please note all body work was done by Street Dreams Customs in ocala florida, Jdmups proudly recommends these guys for any of your paint and install needs. They do great work as you can see from the pics..

[richcon]

Yes most def
Street Dreams Customs did
great paint and body work on Mike's Car

[Griffin400]

Looking good guys!!!

[richcon]

Thanks Griffin!^
Its alot of flipping parts lol

[K24_ELEMENT]

ily gregory
why is this kid so gay????

but seriously, sick job cant wait to get the magazine

[blkgsr-t]

thanks for all the support guys...and if there is anything we can do at JDM ups for you please dont hesitate to ask...

[K24_ELEMENT]

how about gettin l3gitimate and i eg hatches? that would help

[blkgsr-t]

how about gettin l3gitimate and i eg hatches? that would help


lol search on honda tech, were not a dealership:lol: :cool:

[DSM Dave]

Next weekend for sure?

[blkgsr-t]

ummm i actually have to talk to greg about this....Honda Tuning has given me strict instructions not to allow anyone else to shoot the car until the mag has been released...so this is prob going to have to wait, i mean we can shoot it but i cant not allow wiredonhonda.com to see any pics of the car until the mag is released..otherwise my feature is void!

[DSM Dave]

We can wait. When is the mag suppose to come out?

[blkgsr-t]

thats still TBD, there were some issues with the first location we did, so we re shot part of it this past weekend, the editor should be recieving the pics today, and as long as everything looks good then should be out soon, most magazines are 3 months out, but he has not told me when it will be released at the moment, the issue is, i have HCI and Sport Compact car lined up to shoot the car as well and each are going to want the car to look different, so im going to have to make some changes soon

[skyontC]

bump for my boys integra...post up some pics of the seats

[blkgsr-t]

bump for my boys integra...post up some pics of the seats
lol nope! im keeping you in suspense to get your ass back to florida:mullet:

[DSM Dave]

thats still TBD, there were some issues with the first location we did, so we re shot part of it this past weekend, the editor should be recieving the pics today, and as long as everything looks good then should be out soon, most magazines are 3 months out, but he has not told me when it will be released at the moment, the issue is, i have HCI and Sport Compact car lined up to shoot the car as well and each are going to want the car to look different, so im going to have to make some changes soon

O damn, well tell Greg to call me when you have more info. Thanks

[richcon]

I will do Dave ^

[DSM Dave]

Thanks greg

[blkgsr-t]

this car will be in the september 08 edition of Honda Tuning!!!