jrsink
02-17-2008, 11:08 PM
sorry guys no little camera fone pix this time, my metro sliver went to the little camera fone shop in the sky
1st :
everything came out awesom! super custom headlight brackets constructed from oem kouki brackets, no bunmper support (worked out great martin), custom fender braces and bumper retai9ner brace. overfenderrs and the rest of the car will be molded smooth, probably weld doors shut, and lose door handlessss\\
expanding foam inside overfenders(3omm) for structual integrity
everythings on, except rear bumper(origin stylish) and sideskirts (origin aggressive)(which i will be re-picking up from zfever, i didnt want the aggressive style at first, but i think its really gonna match up well with all the neg camber im running.still need a corner light(in the mail), and s14 headlight connectors, have only projectors wired at the moment, need main driving light connectors, black tinted usdm headlights
plan to drop front about an inch, wheels completely flush around. THATS RITE, front lip/canards ARE ABOUT 4 INCHES OFF THE GROUND
2nd: s13.4 20mm fiberglass fenders purchased from someone on FD (supposedly from the old enjiku s13.4) turned out to be OEM FIBERGLASS s14 20mm kouki fenders, made em werk anyway :smile: slight trimming still needed
3rd: i used s13 hood hinges and remounted them, but im gonna delete those all go with 4 hood pins all around (HOOD SITS A LITTLE HIGHER IN THE BACK, DONT LIKE IT)
3rd: paint um hopefully this week, still deciding on color, can do black or white or combo super cheap(IF ANYONE NEEDS A BLACK OR WHITE PAINT JOB CONTACT ME DIRECT)have materials already, clear/black, flat black no clear, 2 tone blk/wht, reverse 2 tone/upper third 2 tone...or i could buy any color idk im still deciding what i wanna do. kouki midnit purple is about 40 bux a pint not too expensive idk...any input will help me...pix up soon maybe...need photographer ASAP
this front fits the car like fuckin butter btw :smile:
will be bringin it out to whatver the next event is. should be t28 kat ~225 hp by march 3rd for desoto !!! then its on!
1st :
everything came out awesom! super custom headlight brackets constructed from oem kouki brackets, no bunmper support (worked out great martin), custom fender braces and bumper retai9ner brace. overfenderrs and the rest of the car will be molded smooth, probably weld doors shut, and lose door handlessss\\
expanding foam inside overfenders(3omm) for structual integrity
everythings on, except rear bumper(origin stylish) and sideskirts (origin aggressive)(which i will be re-picking up from zfever, i didnt want the aggressive style at first, but i think its really gonna match up well with all the neg camber im running.still need a corner light(in the mail), and s14 headlight connectors, have only projectors wired at the moment, need main driving light connectors, black tinted usdm headlights
plan to drop front about an inch, wheels completely flush around. THATS RITE, front lip/canards ARE ABOUT 4 INCHES OFF THE GROUND
2nd: s13.4 20mm fiberglass fenders purchased from someone on FD (supposedly from the old enjiku s13.4) turned out to be OEM FIBERGLASS s14 20mm kouki fenders, made em werk anyway :smile: slight trimming still needed
3rd: i used s13 hood hinges and remounted them, but im gonna delete those all go with 4 hood pins all around (HOOD SITS A LITTLE HIGHER IN THE BACK, DONT LIKE IT)
3rd: paint um hopefully this week, still deciding on color, can do black or white or combo super cheap(IF ANYONE NEEDS A BLACK OR WHITE PAINT JOB CONTACT ME DIRECT)have materials already, clear/black, flat black no clear, 2 tone blk/wht, reverse 2 tone/upper third 2 tone...or i could buy any color idk im still deciding what i wanna do. kouki midnit purple is about 40 bux a pint not too expensive idk...any input will help me...pix up soon maybe...need photographer ASAP
this front fits the car like fuckin butter btw :smile:
will be bringin it out to whatver the next event is. should be t28 kat ~225 hp by march 3rd for desoto !!! then its on!