Building Motor For Boost ??
Thread Starter
Registered User
Joined: Jul 2007
Posts: 26
Likes: 0
Building Motor For Boost ??
ok so heres wats up , i have a 92 civic si (d16z6) that is stock except for the intake , headers and exhaust .
im not sure if im going to turbo it in the future , so for now im just thinking of building it a little so if i do boost it , it will be able to handle more than just the minimum boost and wont blow or watever . and i was putting various prices together and it was coming to more than 2thousand bucks and i cant put all that in rite now .
so... wat do you guys think i should get to get some decent hp naturally aspirated , for now .
i was thinking along the lines of ..... zex cam, pistons and rods , throttle body and intake mani .
is that good or am i leaving something out .?
im not sure if im going to turbo it in the future , so for now im just thinking of building it a little so if i do boost it , it will be able to handle more than just the minimum boost and wont blow or watever . and i was putting various prices together and it was coming to more than 2thousand bucks and i cant put all that in rite now .
so... wat do you guys think i should get to get some decent hp naturally aspirated , for now .
i was thinking along the lines of ..... zex cam, pistons and rods , throttle body and intake mani .
is that good or am i leaving something out .?
Green with Envy
Joined: Feb 2005
Posts: 1,176
Likes: 0
motor swap.
__________________
http://www.cardomain.com/ride/2931273
'06 Mazdaspeed 6
L3-VDT
'02 S2000... Sold
F20c
'93 Civic dx... Sold
B18C1
'95 4dr. GSR... Sold
B18C1 Supercharged
'95 LS... Sold
http://www.cardomain.com/ride/2931273
'06 Mazdaspeed 6
L3-VDT
'02 S2000... Sold
F20c
'93 Civic dx... Sold
B18C1
'95 4dr. GSR... Sold
B18C1 Supercharged
'95 LS... Sold
Originally Posted by shamoo
I have no problems punching a 10 year old in the face if they dented my car with intent.
^is rocking the SOHC^
Joined: Feb 2006
Posts: 714
Likes: 0
how much is more than just a little boost? like what are your goals?
^is rocking the SOHC^
Joined: Feb 2006
Posts: 714
Likes: 0
the z6's are good for around 200 stock. just get some arp head bolts and a good tune and your set
engine building &amp;amp;best
Joined: May 2003
Posts: 11,971
Likes: 0
^i would buy rods and pistons stock sohc rods are like twigs..i would go with what was said rods/pistons and a blockguard that way you got the bottom end out the way and very strong
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
Registered User
Joined: Dec 2006
Posts: 799
Likes: 0
im think about doing the same thing. but my set up will be
D16Z6 head
B7 block
Upgrade pistons and rods
310 fuel injectors
motor rebiuld( internals)
Td05 turbo
only gonna be doin about 6psi( i dont race)
so yeah.. thats gonna be my set up by this summer. in my 1992 eg.. sound good? good luck with urs
D16Z6 head
B7 block
Upgrade pistons and rods
310 fuel injectors
motor rebiuld( internals)
Td05 turbo
only gonna be doin about 6psi( i dont race)
so yeah.. thats gonna be my set up by this summer. in my 1992 eg.. sound good? good luck with urs
