PDA

View Full Version : Dyno: Driven Concepts Integra Turbo


Alpha
01-10-2008, 11:58 PM
Car: Integra

Engine: DART B20 block, DART head, unknown valve train, Crane cams, 3mm (?) head gasket, 95mm Scat crank, Eagle rods, JE 13:1 pistons (?), ARP head studs

Mods: Driven Concepts top mount exhaust manifold, Driven Concepts 4" e-cutout downpipe, Driven Concepts intercooler piping, Turbo Smart 44mm wastegate, Driven Concepts intake, Driven Concepts dump tube out front bumper, T4 TO4Z (T4/T67) ball bearing turbocharger, Edelbrock intake manifold, Precision 1000cc injectors, Bosch 044 (2) fuel pumps, NGK 4554 spark plugs, AEM boost control solenoid, 30-1040 AEM EMS tuned by Alpha

Tuning at 11.8lbs creeping roughly to 12.2lbs on 93 octane:

483.62whp 378.38ft-lbs Uncorrected

Tuning at 17.8lbs creeping roughly to 18.4lbs on C16

629.00whp

We had some ignition issues, dyno issues (stack fan went out), severe traction issues and radiator cap issues. In all. The car did great. The crew at Driven Concepts did a great job on the car! Internal logs showed 91% duty cycle but was not leaning out, yet

uyht
01-11-2008, 12:01 AM
no tq recorded on the 629 run?

Alpha
01-11-2008, 12:32 AM
Unfortunately not :( It was late and I forgot to hook the pickup back up

cslother
01-11-2008, 12:40 AM
^^^^^ bad ass tuner

JR.
01-11-2008, 08:00 PM
^+1 if theres anyone i trust dyno tuning my car is alpha.. btw why such a high compression? was this an N/A car?

Ghost Rider 666
01-11-2008, 08:26 PM
wasn't this the silver integra DC built Alpha?

SpottedMango
01-11-2008, 08:31 PM
This car was originally built for nitrous.

^+1 if theres anyone i trust dyno tuning my car is alpha.. btw why such a high compression? was this an N/A car?

SpottedMango
01-11-2008, 08:32 PM
This car is blue with silver strips.

wasn't this the silver integra DC built Alpha?

uyht
01-11-2008, 08:37 PM
This car is blue with silver strips.


for now........

until ian mans up and paints that bitch black.

manifoldmike
01-11-2008, 09:42 PM
gotta love the numbers. it does pretty good burnouts......going 80mph.:cool:

T4eg
01-11-2008, 10:27 PM
what were corrected/uncorrected #s. looks laggy for 67bb expecally 4th gear

manifoldmike
01-12-2008, 12:12 PM
what were corrected/uncorrected #s. looks laggy for 67bb expecally 4th gear

pretty sure thats uncorrected. its not bb and it is a little laggy.

turbo = journal t4/t67 watercooled, .96a/r exhaust p-trim, s-cover

T4eg
01-13-2008, 12:55 AM
still laggy

JR.
01-13-2008, 01:30 AM
i thought all aftermarket journal bearing turbos where only oil cooled...

TheRedDragon
01-13-2008, 02:53 PM
ttt

Liquid
01-13-2008, 02:58 PM
more pics of the beast?..

uyht
01-13-2008, 04:17 PM
http://www.tamparacing.com/forums/driven-concepts/436063-700-whp-integra-build-pics.html

Alpha
05-28-2008, 02:08 PM
We're no longer with Brotherz Racing (http://www.tamparacing.com/forums/mitsubishi-tech/486549-jamil-brotherz-racing-we-no-longer-there.html). Thread has been moved