View Full Version : need advice
racerforlife
12-04-2007, 11:12 AM
i have this 1996 dodge neon that i bought from a salvage yard for 250 its an auto and i was wondering if it would be worth it to get a five speed
chi town brat
12-04-2007, 06:27 PM
Moved to the correct forum.
Hope you find the information you need.
Welcome to TR
chi town brat
S Mod
flea69691
12-04-2007, 06:44 PM
if u can find the parts at a junkyard then yes
bubblelip
12-05-2007, 12:54 AM
yeah its way worth it i love my neon
Fast420A
12-05-2007, 12:06 PM
What are you trying to do with it? Road Race, Drag Race, Both? If you plan on making a drag car the auto tranny is going to be a good idea if you want to get a turbo on it and just floor it. If you want a road race car then the control over the car with a manual tranny is a better idea.
flea69691
12-05-2007, 04:55 PM
yeah its way worth it i love my neon
so when u swaping yours
neondriver
12-05-2007, 10:30 PM
i would swap it, i started modding mydohc atx and it was still slow as hell i was going to do a tranny swap but ended up buying a acr. and if you can get an acr tranny because the ending gear ratio is quicker than a base one
bubblelip
12-05-2007, 11:41 PM
so when u swaping yours
well i am just waiting on my pistons to come in and then put it togeher and get a megasquirt i think about a month or two
Ahhhh Nick!
12-06-2007, 10:03 AM
Yes, it's worth the swap. I've done them myself and I can honestly say you can get it done in a weekend. Nothing too hard about it, just a bitch to get the clutch pedal in (tight space). Look at Neons.org - The best neon site on the net! (http://www.neons.org) there's plenty of atx to mtx swap info on there.
racerforlife
12-06-2007, 10:14 AM
how much would a five speed cost
Ahhhh Nick!
12-06-2007, 10:34 AM
They say it's usually around $300 for all the parts. ECU, axles, transmission, clutch, throw-out bearing, k-member, shift cables, shifter, clutch pedal.
While you're at it go ahead & put a new clutch, new throw-out bearing, booger shift bushings and a short shifter in there.
Fast420A
12-06-2007, 12:06 PM
and if you can get an acr tranny because the ending gear ratio is quicker than a base one
Yeah, check out the tranny first as some are 3.55 final drive and others are 3.94. You want 3.94 for faster acceleration and the 3.55 if you are turboed and having traction issues and want a higher top speed.
Ahhhh Nick!
12-06-2007, 12:10 PM
Yeah, check out the tranny first as some are 3.55 final drive and others are 3.94. You want 3.94 for faster acceleration and the 3.55 if you are turboed and having traction issues and want a higher top speed.
The 3.55's also get better gas mileage on the highway. I'm popping in and out of v-tec at 70mph in 5th gear :lol:
bubblelip
12-06-2007, 11:22 PM
vtec hahahah that nice i wish i had vtec
vBulletin® v3.6.4, Copyright ©2000-2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by
vBSEO 3.2.0 RC5