PDA

View Full Version : boost gauge

amimaxima
11-26-2007, 11:15 AM
where would be the best place to tap a fitting for the boost gauge?
XxdycexX
11-26-2007, 12:23 PM
T-off of any vaccum source i did mine right off the back of the intake mani
TNathe
11-26-2007, 02:59 PM
:werd:
amimaxima
11-26-2007, 09:19 PM
what about after the bov before the tb?
dscivicdx
11-26-2007, 11:01 PM
if possible you should use a short, non-t'ed line from the intake manifold for the boost gauge.
amimaxima
11-27-2007, 01:44 PM
like drill and tap the intake manifold and hook up a fitting for the boost gauge?
dscivicdx
11-27-2007, 03:34 PM
yeah, that would work if possible. can you find an existing vacuum port that you can free up? that would be easier that drilling and tapping it.
Sneakin Deacon
12-01-2007, 04:20 PM
like drill and tap the intake manifold and hook up a fitting for the boost gauge?

just T it off of something, dont go through all of that hassle of removing the intake and shit to drill/tap it. everything pressurizes at the same rate so one place wont give you a different reading than another.