Big Turbo

[hmmracing]

this is a Garrett T04S

im going to sell my To4S, basically a non ball bearing GT35R

70 a/r compressor housing (polished)
.82 a/r turbing housing
4" inlet
2 1/2 outlet
4bolt dp.
have a 4 bolt adapter with 3" vband already on it,
has a 5/8 return fitting on it and a -4 an feed line fitting on it.
turbo has less than 3 k miles
still have it on my vr6 it pulls like all hell,
its in mint condition.
only reason im trying to sell it i want to sell it is i want a gt35R with a 1.06 turbing housing,
700 shipped.
http://i30.photobucket.com/albums/c344/swim69bob/DSCF0408.jpg
http://i30.photobucket.com/albums/c344/swim69bob/DSCF0409.jpg

[2 ROWDY]

it looks nice, but what does it do?!?!?!

[BluRRboSi]

500

[hmmracing]

700 shipped is my price. that is it,

[manifoldmike]

just thought i would chime it, but you have nothing in the description for what turbo it actually is. listing the housings doesn't really discribe the turbo.

that could be a 35r that you have pictured.

if you don't know what it is, pop the compressor housing and the turbine housing off and measure both the inducer (smaller side on intake) and the exducer (bigger side on the intake) on each wheel. measure in mm. the measurements have to be precise, so you might want to use a dial caliper to measure them.

if there is a tag on the center section with a part number on it, that would be a lot of help too.

[hmmracing]

my badd im dumb, its a Garrett i fixed it up there , thanks

[hmmracing]

sombody get this i need a bigger one