??SRT4 Mopar Stages??

[2 ROWDY]

Whats going on guys, I've got a question for the SRT4 guys...

What are the Mopar Mods per Stage?? (1-3, or is it 1-4? lol)

and How quick is each stage supposed to go in the 1/4? Est. HP per stage?

I think they are very simular to the AMS stages in modifications for the Evos, correct me if im wrong... but I'm just trying to figure this out because I was never told what each stage consisted of and how quick they are supposed to be when they are "stage 3" lol.

I ask because I ran one the other night that was supposedly a stage 3 car, but I really doubt it because it didn't impress me since I beat him and so did my friend's stock Evo 9 from a roll and dig!

Thanks guys.

[TIM TIM TIM]

I think it goes to stage 3 and im pretty sure stage 3 is supposed to be in the 400hp+ range.

[KrazyRider83]

Check the dodge tech or ask some people on the srtforum...I'll see if I can find some info for you.

BTW...they go from stage 0 (stock) to stage 3 & a stage 3 (if that & all bolt-on's average 350-350+ on a good day, & maybe with HOM) should pull on a stock evo (not on a dig though but will catch up, but def on a roll)...so something wasn't right.

[Matt M.]

Whats going on guys, I've got a question for the SRT4 guys...

What are the Mopar Mods per Stage?? (1-3, or is it 1-4? lol)

and How quick is each stage supposed to go in the 1/4? Est. HP per stage?

I think they are very simular to the AMS stages in modifications for the Evos, correct me if im wrong... but I'm just trying to figure this out because I was never told what each stage consisted of and how quick they are supposed to be when they are "stage 3" lol.

I ask because I ran one the other night that was supposedly a stage 3 car, but I really doubt it because it didn't impress me since I beat him and so did my friend's stock Evo 9 from a roll and dig!

Thanks guys.

Stage 1 includes 577cc injectors and an upgraded pcm(powertrain control module)and raises power to 240 hp @ 5200 rpm and 260 ft-lbs @ 2400-4400 rpm.

Stage 2 includes a stage 2 pcm,682 cc injectors,adjustable wastegate actuator,3.0 bar tip sensor,3.0 bar map sensor and an optional intercooler sprayer.

Stage 3 includes a stage 3 pcm with block off connector, TD05HR-15GK2-10cm2 Turbo Unit and Manifold,Pressure Regulated Fuel Rail Assembly with 4.0 Bar,Returnless Regulator and Hose Kit.
Stage 3 power figures are:
355 hp at 5200 rpm and 365 ft.-lbs. of torque at 3200–4800 rpm.

[Figs]

Stage 1 includes 577cc injectors and an upgraded pcm(powertrain control module)and raises power to 240 hp @ 5200 rpm and 260 ft-lbs @ 2400-4400 rpm.

Stage 2 includes a stage 2 pcm,682 cc injectors,adjustable wastegate actuator,3.0 bar tip sensor,3.0 bar map sensor and an optional intercooler sprayer.

Stage 3 includes a stage 3 pcm with block off connector, TD05HR-15GK2-10cm2 Turbo Unit and Manifold,Pressure Regulated Fuel Rail Assembly with 4.0 Bar,Returnless Regulator and Hose Kit.
Stage 3 power figures are:
355 hp at 5200 rpm and 365 ft.-lbs. of torque at 3200–4800 rpm.

Correct... Stage 2 and Stage 3 you have the option to go with Toys. Which is a console that includes the following...
DAB (Dail A Boost) feature in which 0-3... 0 being your lowest boost setting and 3 being the higher boost setting... so you have 0,1,2,3.
HOM (High Octane Mod) feature is for when your running race gas
IC Sprayer (Intercooler Sprayer)

[Figs]

Now AGP sells a kit they call a Stage 4 Package for the SRT-4 which you can find here....
AGP Turbochargers, Inc. :: SRT-4 :: Package Deals :: AGP SRT-4 Stage 4 Package (http://www.agpturbo.com/product.php?productid=16269&cat=311&page=1)

[cali]

Just remember when they say stg3, you have to ask "Mopar Stage 3" ? or 'the other guys, stg3'

[zaksblaklabel]

dont bother with anything but stg3

[ACR2NV]

stage 3 no toys is rated at 305hp while with toys in high octane mode its 355hp

figures are rated at "crank" according to dodge but personally ive had a few on the dyno turn 360fwhp on HOM with few bolt ons and as much as 420fwhp with full bolt ons


Mopar Stage 3 btw im not talkin other's stage3

[2 ROWDY]

cool thanks guys!

[mysteryskittle]

yea either way a stock s3 srt only dynos like 280 a basic bolt on srt can do better than that but wit sum tuning its can run pretty good especially in hom

[SRT4beepo]

stage 1 : 240

stage 2 : 260-270ish

stage 3 : tune: 450whp without tune: 400ish!

[mpbiv]

stage 3 : tune: 450whp without tune: 400ish!
:lol:

That's not quite true, it takes more than just tuning. Like ACR2NV said: ~360fwhp on HOM with mild bolt ons, ~420fwhp with all the bolt ons and tuning.

I need to dyno my Stage 3 car, but it has trapped up to 118.42 on HOM, and I have mild bolt ons (FMIC, 3" Exhaust, 3" O2, AGP WGA, and Intake). I'd bet I am in the ~365-370 range

[siberian57]

stage 1 : 240

stage 2 : 260-270ish

stage 3 : tune: 450whp without tune: 400ish!
good luck getting those numbers without a big wheel