WTB amp-up to $200

[rich4rdee]

hi guys, not sure if i want a mono or 2 channel amp to power my two 12s (http://www.crutchfield.com/S-3uMWzJkfGiG/cgi-bin/ProdView.asp?I=108PER121).

i'm gonna have $200 cash and will be in the tampa bay area on friday.

throw up what you got. thanks!

[rich4rdee]

up

[norachelhere]

i'm not an expert and i'm sure someone would prove me wrong, but if you are gonna treat the two subs as one bass source, then a mono would be prefect, but if you want a slightly more dynamic sound and want to treat it as a right sub and a left sub, you would use your 2 channel...
just my 2 cents...
good luck finding what you are looking for

[THATdamnFAST]

http://www.tamparacing.com/forums/car-audio-sale/408942-f-s-f-t-rockford-fosgate-p550-2-amp-good-price.html

[Goodfella7805]

i have a kenwood mono class D Amp for sale or trade, LMK
900W RMS (continuous) x 1 @ 2 ohms
1800 Max @ 1 ohm

Heres the amp Kenwood - 500W Class D Mono Amplifier with Crossover - KAC-9103D (http://www.bestbuy.com/site/olspage.jsp?skuId=8226608&st=car+audio&lp=20&type=product&cp=1&id=1166840602819)

[Dorsey233]

I Have A 1200 Watt Amp ...sony Xplod

[nightstalker352]

I have an MBQuart RAA1000 would take 175 for it. Its serious power it can take 2 gauge straight in.


1000 watt RMS monoblock amplifier Reference Series
Power output: 1000 watts RMS x 1 chan @ 1 ohm
RMS Power (4 ohms): 250 watts x 1 chan.
RMS Power (2 ohms): 500 watts x 1 chan.
RMS Power (1 ohm): 1000 watts x 1 chan.
Min. Impedance Unbridged: 1 ohm
Signal to noise: >80 dBA
Built-in Crossover: LP (50 - 250Hz), Sub (15 - 50Hz)
Bass Boost: 25 - 100Hz
Input signal: 150mV - 8V
Dissipation topology: cast aluminum heatsinks
Bass remote included
Dimensions: 11" x 15.75" x 2.25"

[rich4rdee]

I have an MBQuart RAA1000 would take 175 for it. Its serious power it can take 2 gauge straight in.

1000 watt RMS monoblock amplifier Reference Series
Power output: 1000 watts RMS x 1 chan @ 1 ohm
RMS Power (4 ohms): 250 watts x 1 chan.
RMS Power (2 ohms): 500 watts x 1 chan.
RMS Power (1 ohm): 1000 watts x 1 chan.
Min. Impedance Unbridged: 1 ohm
Signal to noise: >80 dBA
Built-in Crossover: LP (50 - 250Hz), Sub (15 - 50Hz)
Bass Boost: 25 - 100Hz
Input signal: 150mV - 8V
Dissipation topology: cast aluminum heatsinks
Bass remote included
Dimensions: 11" x 15.75" x 2.25"

i'm really looking to match the power as closely as i can. i heard this makes the best sound quality while not having to worry about blowing the subs or the amp. so i guess i'm looking for a 2 channel amp that is the closest i can get to 350w @ 4 ohms.

thanks!

[nightstalker352]

Well if you have 2 4 ohm woofers wired to the amp it will sit the amp at 2ohms giving you 500 RMS which should be a good amount of power if the subs are in the right box.

[94civicb16]

^^^ That is tru