new drift project

[flyspyder55]

http://a89.ac-images.myspacecdn.com/images01/84/l_fd3eb9a575f95c05f4eedc54c5cfa060.jpg12 days after i bought the car and it wa 100% stock the day i got it.

http://a928.ac-images.myspacecdn.com/images01/121/l_0e32f94d4585d3ec707265ed825a6e5f.jpg

STOCK ANGLE....


86'sare so rediculously over rated.... roughtly the same weight as my celica, all the suspension stuff is interchangable, rearends are the same. except instead of a weaksauce 100 ftlbs 4ag, u get a nice torqey r series motor.

http://a840.ac-images.myspacecdn.com/images01/77/l_58fb1f4b342fdeb50afc963ed18d88e7.jpg

I'M GOING TO KEEP AN UPDATED LIST OF MODS
ENGINE-
-internally stock 20r
-lc engineering 15 lb steel flywheel
-HD pickup clutch disk and PP
-aluminum rockers
-mikuni 272* cam .430 lift
-webber 32/36 downdraft carb
-2.5" full length header
-blaster 2 coil



BODY-
-stock :(

SUSPENSION-
-flyspyder fabrication short stroke strut housings
-336 lb/inch coilovers up front
-220 lb/inch coils in rear
-oem equivilent mr2 sw20 rear shocks in front
-oem equivilent 88 camaro shocks in rear
-whiteline adjustable front sway bar
-whiteline adjustable rear sway bar
-techno toy tuning camber plates
-full poly bushing kit from josh at 185performance (only 190ish... well worth it)

BRAKES-
-stock :(

WHEEL AND TIRE-
-14x7 konig rewinds
-205/60r14 falken ziex rubber all around

INTERIOR-
-cobra full bucket seat
-autometer water temp gauge in factory location
-autometer oil pressure gauge in factory location

[REY]

How much do you want for those baller DEEP DISH VIP wheels?

[S13_01]

said it before and i'll say it again, that is completeley badass and a whole lot more baller than an 86

[flyspyder55]

http://a621.ac-images.myspacecdn.com/images01/82/l_210d6ff8514e39ee60b30d6b2104dfac.jpghttp://a719.ac-images.myspacecdn.com/images01/73/l_3812bd9d8baf4d73b5f00aea977c9b3e.jpg


oh and dont get your hopes up... it wont go in this car any time soon, but a test fit of my 2jz, with k33 turbo in another 76 elica coupe shell

http://a639.ac-images.myspacecdn.com/images01/20/l_f5fa85846e47150cda277c3f4e9685a6.jpg



http://a243.ac-images.myspacecdn.com/images01/22/l_4bc6499ec00fcf1cd164009ee6854cca.jpg
u mean these wheels? 2500 obo with tires... michelin pilots... there 420 new for rears and 370 new for fronts EACH.

[B18C5-EG]

this car is fucking sick! bout time someone did one of these! gl keep us updated!

[Shadytrixta1]

bad ass rep for you!

[REY]

PROPS for going a less common route... You cant get up with my corolla tho... LOL JFWY !!

[flyspyder55]

lol... for most people they suck but for those of us that have built a few of these... my 22r/20r hybrid will spank any 20v u got senseless... my last setup ran with a FA motor, the corolla pulled on my but i was running 3.73 gears to the corollas 4.5x... so it wasnt so fair. i hate 4a motors with a passion lol they suck for racing and there damn near the worst motor i could think of for drifting

[REY]

lol... for most people they suck but for those of us that have built a few of these... my 22r/20r hybrid will spank any 20v u got senseless... my last setup ran with a FA motor, the corolla pulled on my but i was running 3.73 gears to the corollas 4.5x... so it wasnt so fair. i hate 4a motors with a passion lol they suck for racing and there damn near the worst motor i could think of for drifting

LOL, who says I'm going 4a series?..

[Silvia_San]

badass celica...............although i love corollas.....and 4ag's.

[flyspyder55]

well i'm about to pickup a corolla, thank god its a te71 though lol... 3t power (lack there of)

[Silvia_San]

i agree with you on that one. i am def not a fan of 3tc's. but those older corollas are awesome.

[170k240]

i was thinking about these cellicas the other day. i saw a yellow one slammed on some pretty nice wheels and i was like hmmmm i wonder if thats rwd. well i guess so

[flyspyder55]

classic-celica.com


theres so many nice celicas there... the guy i bought this car from ahs a f20c in his celica

[B18C5-EG]

LOL, who says I'm going 4a series?..

lol... for most people they suck but for those of us that have built a few of these... my 22r/20r hybrid will spank any 20v u got senseless... my last setup ran with a FA motor, the corolla pulled on my but i was running 3.73 gears to the corollas 4.5x... so it wasnt so fair. i hate 4a motors with a passion lol they suck for racing and there damn near the worst motor i could think of for drifting

ill run you ladies with my lil ol 4ag :cool: ;)

[UwishUhadTHIS]

both cars look badass

[flyspyder55]

lol, its still a stock 20r internally, once the new bottom end is done, your gonna need a FA motor to run wiht this... that or boost... and if your boosting, ive got a couple 3500 lb tanks to run u with

[mikespeed95]

thats hot, and in real clean shape considering how old it is juding by pics. what is that car exactly?

[oASHo]

^ which one the widebody or the red one? the red one is an old celica, and the widebody is a widebody in the making mk3 supra which i want flyspyder, trade me for my mkII celica supra

[mikespeed95]

the celica

[flyspyder55]

its a 1976 celica...

[flyspyder55]

just ordered whiteline sway bars, adjustable front and rear, and some T3 camber plates which i so desperatly need.... anyone have a fender roller near ocala willing to let me use it?

[JC]

Awesome project. That 2jz would be very happy in there.

[jonBODON]

said it before and i'll say it again, that is completeley badass and a whole lot more baller than an 86
Only if it look's like this.
http://img.photobucket.com/albums/v515/bodon/rolling.jpg

[Ronald Mcdonald]

Only if it look's like this.
http://img.photobucket.com/albums/v515/bodon/rolling.jpg

That shit is hot.

[oASHo]

^ id give my left nipple and testicle for that bitch.!!!1

[jonBODON]

^that thing is the meaning of low. fuck air bag's they dont got shit on that bitch

[flyspyder55]

its funny that u guys post pictures of eddies car.... seing as he lives in lynwood washington... and i just happen to be freinds with eddie.

that thing aint shit... heres eddies newest project
73 corona wagon
1jz
EVERYTHING UNDER UNIBODY=CUSTOM

http://www.euronationvw.com/images/EddieMKII/side_eddie.jpg

[flyspyder55]

i need a decent steering wheel, ive got a NRG quick release hub, anyone wanna trade a long ae86 steering wheel adapter for a shorter one?

waiting on the RIGHT clutch fork to come in the mail... then maybee i can actually get this thing sliding

[jonBODON]

its funny that u guys post pictures of eddies car.... seing as he lives in lynwood washington... and i just happen to be freinds with eddie
seeing he's in wash state & on hachi roku.net, big deal. great work tho.

[flyspyder55]

ordering parts to build my adjustable 4 links, adjustable panhard rod, and rebuilding the spare 22r bottom end, and OS valves for my spare 20r head this week!!!... maybee i'll break 150 whp soon!!!!

[flyspyder55]

started working on the new motor today... the build up started by cuttign 12 lbs of the crank.... mmm who says 22r's cant spin... u can kiss my 8000rpm long stroke motor ass goodbye :)

[flyspyder55]

in case anyones wondering, this car is a burt down shell now. back in november my house burned down and this went with it.... looking for a new RA24 shell.... i will not give up!

[Just Dave]

wow man, sorry to hear that. I couldn't imagine losing one of my projects to a fire :(

[lilmike13]

bump looken good

[REY]

bump looken good

READ.. it's burnt to a crisp .......