Suicidal Racing
07-05-2007, 01:44 AM
these are my old race heads that i sold to john at acme racing and now he made a top end combo and is selling them.
sb2 heads,one head has stem holes and the other dont because the one with out was a replacement head due to the old one getting damaged.
276 cc runners
36cc chambers
tit valves 2.15 and 1.625
jesel single shaft rocker stands welded together to make bars
complete set of jesel rocker arms.
sb2 intake,witch will need to be ported
sb2 valley tray
and i think he has sb2 valve covers not sure though.
flow sheet.
Pdr_0006.jpg - Image - Photobucket - Video and Image Hosting (http://s75.photobucket.com/albums/i299/7272000/sb2pics/?action=view¤t=Pdr_0006.jpg)
the guy who flowed them was suppost to flow them to .850 but didn't u can see they are still picking up in flow though..these would make for a good boosted engine.rich from ram racing told me they where designed for n/a..i was going to port the intake side to 315 and do a 2.18 valve..i was looking to make around 1000hp n/a on a 447ci single carb small block combo..they would probley make lil over 820hp right now as they sit on a 400cube engine.
call john fernandez at acme racing..number is 813-901-9099 tell him tony sent u.
thanks for you time
tony laino.
sb2 heads,one head has stem holes and the other dont because the one with out was a replacement head due to the old one getting damaged.
276 cc runners
36cc chambers
tit valves 2.15 and 1.625
jesel single shaft rocker stands welded together to make bars
complete set of jesel rocker arms.
sb2 intake,witch will need to be ported
sb2 valley tray
and i think he has sb2 valve covers not sure though.
flow sheet.
Pdr_0006.jpg - Image - Photobucket - Video and Image Hosting (http://s75.photobucket.com/albums/i299/7272000/sb2pics/?action=view¤t=Pdr_0006.jpg)
the guy who flowed them was suppost to flow them to .850 but didn't u can see they are still picking up in flow though..these would make for a good boosted engine.rich from ram racing told me they where designed for n/a..i was going to port the intake side to 315 and do a 2.18 valve..i was looking to make around 1000hp n/a on a 447ci single carb small block combo..they would probley make lil over 820hp right now as they sit on a 400cube engine.
call john fernandez at acme racing..number is 813-901-9099 tell him tony sent u.
thanks for you time
tony laino.