FS: Modified Apexi GT Spec cat-back, 2 month old

[vtec2STi]

For Sale:

Apexi GT Spec Exhaust for late model STi. This exhaust cAME with 2.5" internal piping at the inlet and opens to 3".

I used it with my GT35R set up which makes over 600 HP thus needed to weld in an aftermarket 3" resonater and new 3" piping at the inlet. New piping is alumanized steel and has been welded professionally. Now it is 3" all the way through and ready to make great power.

I am selling because of noise. I need something a little quieter. The car ran 11.6 @ 123 with full interior and this exhaust.

Post your email below if you are a buyer and I will emial you pics.

THIS IS A VERY NICE & WELL DONE EXHAUST. INCLUDES SILENCER/BUT PLUG.

... its about as loud as your typical round canister exhaust w/rez

$300 obo

Steve
Bartow, FL

[vtec2STi]

bump

[WTFchuck]

would trade if it was 3 inch all the way

[cpages2]

im guessing it wont bolt up to a stock down pipe.

[SilverRexH4]

Im intrested. can you send pics to silverrexh4@yahoo.com

Thanks

[vtec2STi]

Chuck,

Read the post again.


IT IS 3" + ALL THE WAY. THAT IS THE MODIFICATION I DID WITH AN EXHAUST SHOP.

This is a really nice exhaust people!

No trades, I already bought a new exhaust.

Thanks, Steve

[vtec2STi]

Yes, it will bolt to the stock down pipe but you will need a 3" gasket or permatex gasket maker... which is a much beter gasket material anyway.

Pics sent!

[WTFchuck]

ah so it is 3 all the way... nice! i would get it but might be buying stiscoobs exhaust

[ag04]

180sxdrift@gmail.com

Hrmm... interested! thanks!

ag04

[PearlblueS]

whats up man? i live in gainesville. Send me pics to pearlblues03@yahoo.com. I am really interested and i have money in hand.

[vtec2STi]

sorry all.

i have been out of town.. sending pics today.

Steve

[performanceimports]

can you send me pic also

[vtec2STi]

yes, what is your email?

[vtec2STi]

I will have the exhaust off the car Wednesday and will take more detailed pics then for those that have been waiting.

This GT Spec Apexi will bolt right to any after market down pipe that is designed to use the OEM mounting locations and it will bolt up tp the OEM cat/down pipe.

This is a really nice exhaust that will really flow well guys. I bought it for $550 eight weeks ago and replaced the 2.5" inlet and resonater with a 3" one. This is a quality piece that will support big HP. It looks really nice too and will give your ride that N1 look. For extended cruises, pop in the silencer and enjoy stock exhaust noise levels.

I measured the clearance form the rear diff. to the pipe and it is over 1". No exhaust banging with this unit! It is a perfect fit.

I am going to put it up on nasioc and iwsti at the end of the week if there are no takers here.

Steve

[vtec2STi]

bump, still for sale...

it will be off the car one week from today.. next Thursday

[vtec2STi]

Sold.

[CBURKE]

Very nice, seen it in person. ttt