We build Intercooler piping ( Aluminum)

[MrLHT]

We can custom build your intercooler piping , We use Aluminum piping bead rolled, 4 ply silicone connectors and heavy duty stainless clamps the will not blow off. Single turbo, twin turbo with merge joints, You name it.We can build it.

WHY CHOOSE LHT.
http://www.tamparacing.com/forums/lht-performance/487208-why-choose-lht-your-ic-piping.html


We can build 2.5" 2.75" and 3".

Satin, Polished and powder coated

Here's some samples:
http://i89.photobucket.com/albums/k231/lhtperformance/DSC00194.jpg

http://i89.photobucket.com/albums/k231/lhtperformance/DSC00125.jpg

http://i89.photobucket.com/albums/k231/lhtperformance/DSC00037.jpg

http://i89.photobucket.com/albums/k231/lhtperformance/DSC00390.jpg

http://i89.photobucket.com/albums/k231/lhtperformance/DSC00083-1.jpg

[MrLHT]

We can also weld you pipes, mark them how you want them then bring em down. Stainless and aluminum.

[SRT4beepo]

how much would it cost??

[MrLHT]

Complete pipe kits with with intake + silicone connectors and clamps etc are $500 and up.

[MrLHT]

Here's another sample, we also sell Precision intercoolers.

http://i89.photobucket.com/albums/k231/lhtperformance/DSC02827.jpg
ON the above picture, notice the support tab on the intercooler. This takes the stess off the connectors for reliablity and long service.

http://i89.photobucket.com/albums/k231/lhtperformance/DSC02819.jpg

[MrLHT]

Make your appointemnt today for LHT to build you pipe kit.

You can piece your own turbo kit together and have LHT build the intercooler piping.
We have a fast turn around time, and build it right the first time!

[Crab Cakes]

how much for full 3inch piping and my precision 750hp core mounted lmk

-George

[MrLHT]

PM'ed sent

[MrLHT]

This is a complete intercooler piping we built for a K20 integra. The K20 was installed then brought to us for the intercooler piping and intercooler.
We modified a precision 600 intercooler and used all aluminum piping with 4 ply silicone connectors in black.
All the piping is bead rolled to prevent pipes poping off and braces to the pipes don't rub against anything.
This is a brushed finish, we can polish or powder coat and anodize the intercooler for a stealth look.

http://i89.photobucket.com/albums/k231/lhtperformance/DSC01241.jpg

http://i89.photobucket.com/albums/k231/lhtperformance/DSC01243.jpg

http://i89.photobucket.com/albums/k231/lhtperformance/DSC01247.jpg
http://i89.photobucket.com/albums/k231/lhtperformance/DSC01244.jpg
The finished product.

[MrLHT]

K20 Turbo in EG hatch.

All piping is aluminum and bead rolled, Notice the support to prevent the pipes rubbing against each other
http://i89.photobucket.com/albums/k231/lhtperformance/DSC01350.jpg

http://i89.photobucket.com/albums/k231/lhtperformance/DSC01334.jpg

http://i89.photobucket.com/albums/k231/lhtperformance/DSC01326.jpg

[MrLHT]

We use Aluminum only on our intercooler piping, It's not only less than 1/4 the weight of steel or stainless it helps disaplate the heat like the intercooler itself.
Call LHT today for your intercooler piping on any vehicle.

[MrLHT]

Here's a complete LHT intercooler and pipe kit with 90 psi.
You get what you pay for.
http://i89.photobucket.com/albums/k231/lhtperformance/DSC01548-1.jpg

[iamboon]

Was that tested on my set up :D

[iamboon]

LHT Performance finished Subie FMIC

http://www.tamparacing.com/forums/subaru-tech/469128-my-new-fmic.html

[MrLHT]

I'm glad your happy with the set up, Paul and I spent some extra time making it perfect and everything fit 100%.

[MrLHT]

Here's the pic's from the completed Legacy
http://i89.photobucket.com/albums/k231/lhtperformance/DSC01555.jpg

http://i89.photobucket.com/albums/k231/lhtperformance/DSC01556.jpg

http://i89.photobucket.com/albums/k231/lhtperformance/DSC01558.jpg
The piping was built to allow the fog lights to stay
http://i89.photobucket.com/albums/k231/lhtperformance/DSC01559.jpg
Even with the large 3.5" thick intercooler , very little bumper trimming was needed.
http://i89.photobucket.com/albums/k231/lhtperformance/DSC01563.jpg

http://i89.photobucket.com/albums/k231/lhtperformance/DSC01564.jpg

[iamboon]

car is so much quicker with the new FMIC set up!

plus I love raising the hood!

Thanks John and Paul!

[MrLHT]

This is a Volvo S60 R , It's trubo charged from the factory with an very thin intercooler mounted between the AC condensor and the radiator.It also used very small plastic intercooler hoses.
We removed the intercooler and mounted the condensor to the radiator ( Like an Acura integra) then used a larger air to air intercooler in front of them both.
We anodized the intercooler black so it's hiden but does not hurt the cooling efficiancey or chip like paint.

http://i89.photobucket.com/albums/k231/lhtperformance/DSC01591.jpg

The intercooler mounted, The factory fog lights were retained.
http://i89.photobucket.com/albums/k231/lhtperformance/DSC01580.jpg

The 2.5" aluminum piping bead rolled with flow sensor. Our pipes have been tested to 90psi so don't worry about poping off LHT pipes.
http://i89.photobucket.com/albums/k231/lhtperformance/DSC01577.jpg

http://i89.photobucket.com/albums/k231/lhtperformance/DSC01585.jpg

The bumper was trimmed very little to clear the larger core.
http://i89.photobucket.com/albums/k231/lhtperformance/DSC01586.jpg

[chet]

john, what'd you think of the volvo s60R?

i've always liked the way they looked...just wondered if they were that much fun to drive.

[MrLHT]

We don't drive customers cars unless we're tuning them. I have no idea how they drive either, They do look cool though.

[BoostFed95]

Hey John...could you give me a price for a 2.5" piping setup for a 95 civic coupe w/ a Tial 50mm flange? I tried calling you guys on Friday but noone answered :( PM me please and i will give you my phone number. Thanks a lot!

[MrLHT]

A complete piping kit with clamps, silicone connectors , intake and filter is around $550 .

[mariusITR]

I have 2001 Acura Integra Type-R, I purchased the Turbo kit (T3/T04) last year and I'm not happy with the charge piping. Your phoenix Type-R caught my eye in the Turbo Magazine, the way the piping is routed is just flawless. Would you be able to build me the same piping set-up including the intake and it does't have to be carbon fiber, aluminum intake is fine with me. My problem is, if that would lined up with my existing Revhard exhaust manifold and revhard intercooler? Please advise......and how much it would cost me, thank you.

[MrLHT]

No Problem, Give us a call and set an appointment.

[MrLHT]

Aluminum intercooler piping custom built for anything, Import and domestic

Builing a turbo kit from scratch - Call us for your piping.