92 Prelude - LHT Turbo

[MrLHT]

This is a Bone Stock 92 Prelude with a 2.3L.
We will be building one of turbo Kits , and sheet metal intake manifolds. The Exhaust will be a Apex World sport for a nice quiet tone and Gator axles for good luck.
Here's the Before shot:

http://i89.photobucket.com/albums/k231/lhtperformance/DSC00227.jpg

Side View:
http://i89.photobucket.com/albums/k231/lhtperformance/DSC00228.jpg

[2g]

Ah yes another project. Can't wait to see the up coming pics.

[slowsohc]

A 2.3 huh? What size turbo are we looking at John? Good luck, even though I know you guys wont need it.

[MrLHT]

Thanks guys, The Turbo will be a Precision 4431E with a .63ar.
Pics soon.

[MrLHT]

Here's some sneak pics of the Prelude. It will be ready for tuning soon. This motor is an H23 which turns out there's not alot of parts available for . We had to custom make a Radiator and intake manifold. It turned out pretty well.
Greddy Profec B Install with Carbon fibre:
http://i89.photobucket.com/albums/k231/lhtperformance/DSC00244.jpg

A quick pic of the Engine bay:
http://i89.photobucket.com/albums/k231/lhtperformance/DSC00242.jpg

[KARLJACOB777]

Absolutely Spot On. Nice Job John

[MrLHT]

OK, Here's the update. We have been super busy with many projects going on at once.
The Prelude is finished and dyno tuned.
As well as the LHT Turbo we installed gator axles, Auto meter gauges etc.
The car is a 100% daily driver with air condtioning and a quiet exhaust.
http://i89.photobucket.com/albums/k231/lhtperformance/DSC00245.jpg

LHT custom build sheet manifold
http://i89.photobucket.com/albums/k231/lhtperformance/DSC00253.jpg

We cut as little as possible from the front bumper, This is a Precision 600hp intercooler.
http://i89.photobucket.com/albums/k231/lhtperformance/DSC00246.jpg

The fans are replaced by 2 SPAL fans.
Here's the before and after:
http://i89.photobucket.com/albums/k231/lhtperformance/DSC00227.jpg

After:
http://i89.photobucket.com/albums/k231/lhtperformance/DSC00251.jpg

This motor is rated at 130 hp stock.
At 10.5 psi this dynoed at 287whp and 272 tq using Hondata and 580cc injectors, The car is very quiet and a blast to drive. It makes 215 tq at 3000 rpms.

Thanks for looking.

[Presidential_Detail]

WOW, awesome job. Im starting to get a lil sweet spot for the preludes...

[60-1EK]

HAHA. John those engines suck. Good job on that man!

[jlude90]

straight H23?

no frankenstein VTEC?

looks great man, tell the owner to join SFPOA, link in sig

looks clean though, i'm gonna go show off your work

[YARO]

Great work like always

[MrLHT]

Thanks for comments guys, The owner just wanted some power without going extreme. Turbo fixes is all. Because of the tq this makes it feels like it 350whp+.

[Santos]

Here's some sneak pics of the Prelude. It will be ready for tuning soon. This motor is an H23 which turns out there's not alot of parts available for . We had to custom make a Radiator and intake manifold. It turned out pretty well.
Greddy Profec B Install with Carbon fibre:
http://i89.photobucket.com/albums/k231/lhtperformance/DSC00244.jpg

A quick pic of the Engine bay:
http://i89.photobucket.com/albums/k231/lhtperformance/DSC00242.jpg

:-o :-o :-o :-o :-o :-o :-o

i have just made my decision, this was the straw that broke this big guys back, im keeping my lude, the wife can get her new car. what are the numbers on this? and whats pricing on this set up? options, as far as intake manifold go? how much better is this one compared to stock? great job guys, im loving it.

[Green_Lantern]

Damn! Yall do some awesome work! Yall wanna make my lude your next project? I assure you it would be challeging... lol