Pricing

[Alpha]

I dont need it at the current moment but I would like to get a ball park on how much I need to set aside. Can you give me an estimate on pricing for the following in 6061-T6 aluminum? Thank you

Side view
http://memimage.cardomain.net/member_images/1/web/361000-361999/361622_424_full.jpg

5 -8 AN fittings

http://memimage.cardomain.net/member_images/1/web/361000-361999/361622_425_full.jpg

Bottom bracket to bolt onto car bracket (or do something similar)
http://memimage.cardomain.net/member_images/1/web/361000-361999/361622_433_full.jpg

Side view of the bracket and gussets
http://memimage.cardomain.net/member_images/1/web/361000-361999/361622_434_full.jpg

Top view with filter inserted
http://memimage.cardomain.net/member_images/1/web/361000-361999/361622_435_full.jpg

Top view with filter removed
http://memimage.cardomain.net/member_images/1/web/361000-361999/361622_436_full.jpg

Vent holes (baffle right under the holes)
http://memimage.cardomain.net/member_images/1/web/361000-361999/361622_437_full.jpg

Another shoot of the baffle (kinda hard to see)
http://memimage.cardomain.net/member_images/1/web/361000-361999/361622_438_full.jpg

Bad pic of the inside baffle (see next pic)
http://memimage.cardomain.net/member_images/1/web/361000-361999/361622_439_full.jpg

Better pic of the baffle inside the can
http://memimage.cardomain.net/member_images/1/web/361000-361999/361622_440_full.jpg

Another side view
http://memimage.cardomain.net/member_images/1/web/361000-361999/361622_441_full.jpg

Close up view of the vent holes
http://memimage.cardomain.net/member_images/1/web/361000-361999/361622_442_full.jpg

And another one
http://memimage.cardomain.net/member_images/1/web/361000-361999/361622_443_full.jpg

Insert filter here
http://memimage.cardomain.net/member_images/1/web/361000-361999/361622_444_full.jpg

[gritt]

i`ll pass this on to my fabricator and get back to you

[Alpha]

Thank you

[gritt]

what is the designed purpose of this? do you have an example for dimentions? We should be able to make this, if there are any specific points, such as mounting holes, we will need acurate dimentions.

[Alpha]

It's a catch can. I will get you measurements asap. It will be in place of the battery in a 1992 Honda Civic hatch

[jcrock]

Great looking catch can, hope it goes into production!

Will there be a ball park price range?

[Alpha]

A lot of people would buy these if produced. I will get measurements when I get a chance