PDA

View Full Version : Durdan PerFab Built

Alpha
08-17-2006, 06:57 PM
Taylor did a great job building the engine. Has almost 10,000 miles on it and has not been babied. I beat on it every day and beat the Hell out of it every weekend. It's down right now. New clutch, turbo, exhaust manifold, etc.

http://www.inductionperformance.com/image/car/alpha/alphaeghatch6-wm.jpg

The dyno below was done on a loaded Dyno Dynamics dyno. AKA "The Heartbreaker" to some :lol: Straight off my street tune. No adjustments made on or before the dyno. Cam gears set at 0-0. Found an exhaust manifold leak after the dyno. Between that and the clutch slipping caused the lag in the dyno sheet. First pull the clutch slipped. Let out early. Tried again. Slipped. Made one last pull and timing came unsynched around 6500RPM :-o 99B16Si was the first to notice :lol: :mullet: On a Dynojet it would have made around 340whp 260ft-lbs and more with a good clutch and no exhaust manifold leak

http://www.inductionperformance.com/image/dyno/alpha/alphadyno-wm.jpg

A video of the car running Dario's GT30R @ 22lbs GST

RIGHT CLICK SAVE TARGET-AS (http://www.inductionperformance.com/video/race/street/darioVsAlpha.wmv)

Thanks again Durdan PerFab :thumbup: :thumbup:
351coupe
09-01-2006, 10:06 PM
That place you guys ran looks so familiar.:dunno:
DriftingDJ
11-12-2006, 10:32 PM
Alpha thats awesome. I bet it gonna be a freak for durability like all his honda builds.
Cronic
11-12-2006, 11:02 PM
Beautiful. :)

My last dyno was on a dyno dynamics as well. Heartbreaker is no joke. :lol:
Alpha
11-13-2006, 06:45 PM
New Port Flow head, Neukin exhaust manifold, Ferrea valve train (valves, springs, retainers, guide seals, seats, keepers, etc) and intake manifold are in :D Waiting on a couple other things now
GsEclipse02
11-13-2006, 09:12 PM
New Port Flow head, Neukin exhaust manifold, Ferrea valve train (valves, springs, retainers, guide seals, seats, keepers, etc) and intake manifold are in :D Waiting on a couple other things now

BALLER
Alpha
11-13-2006, 09:17 PM
BALLER

Como usted
John
11-14-2006, 01:42 AM
You know if Taylor built it, it's been built right. :thumbup:
InsaneCivicCoupe
11-22-2006, 06:48 PM
GT4294R????

I think I may have to have Taylor assemble my new bottom end, because Im too lazy to do it myself and hes one of the few I trust to do it that actually has time :lol:
Durdan
11-24-2006, 10:09 AM
lemme know... ill put it together..
Hotcakes0007
12-14-2006, 05:34 PM
Damn alpha didnt know taylor made ur motor nice pay for what u get awesomeness :D
Alpha
12-14-2006, 07:07 PM
Yup. Taylor built this engine. It has been through a set of camshafts and rockers arm since then though :lol: And now it has a different head, valve train, intake manifold, turbo, exhaust manifold, etc. Still a Durdan Perfab bottom end though :D
Durdan
12-16-2006, 08:50 AM
quit picking crappy parts

hahaha
Alpha
12-19-2006, 07:54 PM
quit picking crappy parts

hahaha

Fuck yo couch nugga :lol: