96neonmike
07-12-2006, 10:09 PM
hey finally got a tach for neon its a actron faze gauge that goes up 2 10,000 rpms pretty easy install after i found the tach wire my neon didnt have one stock but made due since all neons have the tach wire anyone needs help hooking on up pm me or message me ill put the details and the pic of it finished up soon
and also if i have the time pics of how to install one the way i did it
well first i grounded the wire to the under dash frame about 6 screw or more to take off the plastic part and also the metal part ill get pics up soon next i put instead of going in to engine compartment i put the power wire for the shift light and tach light into the fuse box i got to look to see what ones i used and get pics of it also i splice wire on these wires and the last part was taking off the dash and taking out the guage cluster (mph gas ect) 4 screws. in the back you have two harnesses after you take out the cluster your going pop out the right one leave left one alone and look for the grey wire with a blue strip and go and splice in to it with the green wire which is the rpm wire after you get that dont test it before you put it back together then put it back together and your set :0 hope this is helpful now aslo i was going to put the wire for the tach slpicing into the dimmer like it says in the manual but i thought that i really dont need to dim it because it isnt very blinding bright just perfect hope this helps and will have pics up soon as i get the time-mike
and also if i have the time pics of how to install one the way i did it
well first i grounded the wire to the under dash frame about 6 screw or more to take off the plastic part and also the metal part ill get pics up soon next i put instead of going in to engine compartment i put the power wire for the shift light and tach light into the fuse box i got to look to see what ones i used and get pics of it also i splice wire on these wires and the last part was taking off the dash and taking out the guage cluster (mph gas ect) 4 screws. in the back you have two harnesses after you take out the cluster your going pop out the right one leave left one alone and look for the grey wire with a blue strip and go and splice in to it with the green wire which is the rpm wire after you get that dont test it before you put it back together then put it back together and your set :0 hope this is helpful now aslo i was going to put the wire for the tach slpicing into the dimmer like it says in the manual but i thought that i really dont need to dim it because it isnt very blinding bright just perfect hope this helps and will have pics up soon as i get the time-mike