Newest motorheads build
Thread Starter
.........................
Joined: Apr 2003
Posts: 3,562
Likes: 0
Newest motorheads build
B16b block
Endyne knife-edged GSR crank
Eagle big-bolt GSR rods
81mm 9:1 CP pistons
ITR oil pump
Stock B16a2 head
going into Turbo '00 EBP si. Looking for 375 on pump and 450whp on race.
Endyne knife-edged GSR crank
Eagle big-bolt GSR rods
81mm 9:1 CP pistons
ITR oil pump
Stock B16a2 head
going into Turbo '00 EBP si. Looking for 375 on pump and 450whp on race.
Honda Gear Head
Joined: Feb 2005
Posts: 399
Likes: 0
In the 450's @ 7psi, thats koo, but how much pounds you guys are looking to lay on it, because if @ 7 it will be running with 450 or more than 8 will give it a sure pass of the limit and 8psi is what most people think is basically enough psi. I know your looking for 450 off of the race gas, but it seems you all can make alittle more if ya'll wanted.
__________________
No project currently. Getting my ASE Certifications Completed.
No project currently. Getting my ASE Certifications Completed.
Engineer at the source
Joined: Jun 2003
Posts: 2,722
Likes: 0
Originally Posted by juiced2ndgenteg
Almost has the 450's @ 100% duty cycle @ 7psi..... 
