Team Audiotrix F150 [Archive]

Notladstyle

06-15-2006, 10:50 PM

This is what happends when ricers have enough money to do it right...

A kicker system. Looks clean though, who did the work?

TJElite

06-16-2006, 09:59 AM

Need I remind everybody that the famous trifecta...Gates, Biggs, and Eldridge were all with Kicker at one time. Alma's beast was plenty loud, and Biggs was SQ world champ.

Design, install, and speaker placement matter a whole lot more than brand. Its just that better stuff makes those things easier, and covers up mistakes better.

Bad Ass looking install. Hope you bring it to the next meet.

Toby

TBSpyder

06-16-2006, 01:09 PM

Need I remind everybody that the famous trifecta...Gates, Biggs, and Eldridge were all with Kicker at one time. Alma's beast was plenty loud, and Biggs was SQ world champ.

Yeah, a teenie fact that everyone seems to forget. :lol: And didn't Alma hold the SPL record with Kicker for awhile? Thos silly ricers. :P

scrapin_honda

06-16-2006, 03:08 PM

pointing out the obvious here, no ricers drive f150s.lol.let alone jacked up f150s.

Notladstyle

06-16-2006, 04:47 PM

pointing out the obvious here, no ricers drive f150s.lol.let alone jacked up f150s.

thats so not true.

POST

06-16-2006, 05:55 PM

thats so not true.

+1

TBSpyder

06-16-2006, 10:09 PM

thats so not true.

Depends on your definition of ricer. Some limit a ricer to imports. Others go on to include any vehicle with gaudy, tacky, and/or non-functional modifications.

I personally believe in the the second definition though. And I've seen plenty-o F-150's (regardless of a lift) with altezzas, holographic tint, spoilers, windshield squirter neons, painted yellow trim, APC decals, blackout headlight/tailight covers....need I go on?

Notladstyle

06-17-2006, 01:21 AM

Depends on your definition of ricer. Some limit a ricer to imports. Others go on to include any vehicle with gaudy, tacky, and/or non-functional modifications.

I personally believe in the the second definition though. And I've seen plenty-o F-150's (regardless of a lift) with altezzas, holographic tint, spoilers, windshield squirter neons, painted yellow trim, APC decals, blackout headlight/tailight covers....need I go on?

ill go with the second definition and lump the above into it because it has kicker and truck tires that I bet have never seen mud :D

scrapin_honda

06-17-2006, 08:15 AM

ill go with the second definition and lump the above into it because it has kicker and truck tires that I bet have never seen mud :Dok,could opossibly be a ricer,not likely,but possible,but will definately be the loudest at the meet if he shows up.:lol:

POST

06-17-2006, 08:49 AM

ok,could opossibly be a ricer,not likely,but possible,but will definately be the loudest at the meet if he shows up.:lol:

I dont know about that but it might be a good match against Roland.... i just hope he fixes his dang roof flex problem... it'd sound not only so much cleaner but louder too.

that and the wiring

Notladstyle

06-17-2006, 12:53 PM

I dont know about that but it might be a good match against Roland.... i just hope he fixes his dang roof flex problem... it'd sound not only so much cleaner but louder too.

that and the wiring

it would be very interesting if two 15" subs owned 12 12" CVRs.

POST

06-17-2006, 01:07 PM

it would be very interesting if two 15" subs owned 12 12" CVRs.

Oh those are 12's!? =X

i thought those were 8's or soemthing rofl, stupid picture.

yep i'd like to hear this as well then :D

TJElite

06-17-2006, 01:17 PM

Actually, I think they are 15's...

Toby

POST

06-17-2006, 03:04 PM

Actually, I think they are 15's...

Toby

err....

12 * (15/2)(15/2) * 3.14 = ~2119.5

**EDIT Oops... stupid squared.

Surface area of ~2119.5 inches of air moved!? holy crap! ;D

Thanks for the pointer Dalton, i always forget something. might be why i do so bad at...well just about everything in life.

Notladstyle

06-17-2006, 04:59 PM

err....

12 * (15/2) * 3.14 = ~282.6

Surface area of ~282.6 inches of air moved!? holy crap! ;D

ummm... Twelve 15" round subs would produce a moving surface area of just over 2,000 square inches... r0lands two 15s cover a little under 350 square inches.

I am pretty sure they are 12s tho in which case they would about 1350 square inches.

im thinking you are calculating the linear surface area the the cone would cover as it moves forward maybe? not sure..

TJElite

06-17-2006, 06:43 PM

ummm... Twelve 15" round subs would produce a moving surface area of just over 2,000 square inches... r0lands two 15s cover a little under 350 square inches.

I am pretty sure they are 12s tho in which case they would about 1350 square inches.

im thinking you are calculating the linear surface area the the cone would cover as it moves forward maybe? not sure..

Well, he thinks that they are 15's...from the picutres of the june meet thread...

"Look for the white F150 on 35"s with 12- 15" cvr's at the next meet

Team AudioTrix..... "

Maybe you guys can measure them for him. Between the 2 of you, a calculator, and a couple hours, we'll all know. :)

Toby

POST

06-17-2006, 08:21 PM

Well, he thinks that they are 15's...from the picutres of the june meet thread...

"Look for the white F150 on 35"s with 12- 15" cvr's at the next meet

Team AudioTrix..... "

Maybe you guys can measure them for him. Between the 2 of you, a calculator, and a couple hours, we'll all know.

Toby

I only went on the basis of what you said.

and oh yeah thanks...:|

as if that wasnt an unnecessary assy comment

Notladstyle

06-17-2006, 08:30 PM

Maybe you guys can measure them for him. Between the 2 of you, a calculator, and a couple hours, we'll all know.

Toby

It just seemed that 3 15"ers with ~4 inches between them would be pushing 6ft width before the paneling. even if they are 15s ur comment is kinda mean and unnecessary.

KartRex

06-17-2006, 08:51 PM

:lol: Toby is a grouch.....

TBSpyder

06-17-2006, 10:53 PM

Maybe you guys can measure them for him. Between the 2 of you, a calculator, and a couple hours, we'll all know.

Toby

:lol: :lol: :lol:

TBSpyder

06-17-2006, 10:55 PM

They look like 15's to me....

TJElite

06-18-2006, 11:30 AM

:lol: Toby is a grouch.....

Oh yeah, that's me alright...

Toby

TJElite

06-18-2006, 11:33 AM

It just seemed that 3 15"ers with ~4 inches between them would be pushing 6ft width before the paneling. even if they are 15s ur comment is kinda mean and unnecessary.

Yeah, but it was funny. I went back and put a smiley face after it. Do you feel better now? :P

Toby

superflyRR

06-18-2006, 06:00 PM

Its 12-15"s and big mike did the install....I will def. be at the next meet.

Notladstyle

06-18-2006, 10:10 PM

Yeah, but it was funny. I went back and put a smiley face after it. Do you feel better now? :P

Toby

A little.

custom240sx

06-19-2006, 11:35 PM

Theres enough airspace for those? Also, if anyone know, did he chamber each sub by itself? This thing would be bad azz with some ports for spl.

TBSpyder

06-20-2006, 12:30 AM

Theres enough airspace for those? Also, if anyone know, did he chamber each sub by itself? This thing would be bad azz with some ports for spl.

I'm willing to wager it's bad ass regardless of ports. When you're running 12 subs, you're going to pretty much hammer in the spl category no matter what.

Kristin

06-20-2006, 10:30 AM

Whatever they are, it's a nice and clean install. ;)

stealthc9

06-20-2006, 12:54 PM

:crack: :crack: Yeah, a teenie fact that everyone seems to forget. :lol: And didn't Alma hold the SPL record with Kicker for awhile? Thos silly ricers. :P hmm PPI now that's a company to go with, did i hear someone say directed or orion hehehe

scrapin_honda

06-20-2006, 06:23 PM

:crack: :crack: hmm PPI now that's a company to go with, did i hear someone say directed or orion hehehe most of us will take what big mike can build with kicker over almost any company.hes done with autotek and kicker things ive havent seen anyother company do with ppi or directed.dont get me wrong i used to be a huge directed fan,but no one can afford to build a vehicle full of it.and i love ppi used to have a powercalss 2400,best amp i ever owned,but once again too expensive.thats why mike builds kicker,affordable subs anyone can buy.its all about promoting what sells.

superflyRR

06-20-2006, 08:55 PM

They Are Chambered In Pairs.

TBSpyder

06-20-2006, 08:55 PM

:crack: :crack: hmm PPI now that's a company to go with, did i hear someone say directed or orion hehehe

Maybe 10 years ago.... :lol:

the727kid

06-20-2006, 10:13 PM

Are ya'll talking about Mike that works at Radioactive, or did? I took my first car there, he didn't work on it but who ever did half-assed my shyt like bitch. Didn't realize it until my car was totaled and had to take it apart. I heard Mike does some real good shyt himself though.

POST

06-21-2006, 04:00 PM

most of us will take what big mike can build with kicker over almost any company.hes done with autotek and kicker things ive havent seen anyother company do with ppi or directed.dont get me wrong i used to be a huge directed fan,but no one can afford to build a vehicle full of it.and i love ppi used to have a powercalss 2400,best amp i ever owned,but once again too expensive.thats why mike builds kicker,affordable subs anyone can buy.its all about promoting what sells.

i can afford it:P

wsideshow

06-21-2006, 08:32 PM

who cares what he is lol.Nice clean install man props

scrapin_honda

06-22-2006, 06:16 PM