The drifto 510 in underway- pics

[marksaccord95]

after about 10 mo of sitting in my garage and not doing much, i decided to get the project underway.

small rundown

S14 SR20
full coilovers/suspension
adjustable rear cross member
11" front rear 10" brakes
hydro ebrake
FULL interior and Exterior restore
full cage
all new bushings/joints
ditch gear box and fab in a rack n pinion.

more pics
http://www.floridaracing.org/510/bodywork

the paint, toyota thunder cloud metallic, inspired by charles' s14 (in super street last month, you can see me in the drivers seat or the floridaracing.org sticker on the rear bumper)
http://www.floridaracing.org/510/paint/charles2.JPG

stripped to nothing at $hawns (paint) shop.
http://www.floridaracing.org/510/bodywork/mark's%20510%20001.jpg

being the lazy ass $hawn is, to get the holes filled in the engine bay, i had to do myself :)

step one: clean the holes
http://www.floridaracing.org/510/bodywork/mark's%20510%20009.jpg

step two: fill the holes. its a hole, so you have to start at the edges and fill to the middle obviously.
http://www.floridaracing.org/510/bodywork/mark's%20510%20024.jpg

[marksaccord95]

step 2.5 - get molested while welding
http://www.floridaracing.org/510/bodywork/mark's%20510%20020.jpg

http://www.floridaracing.org/510/bodywork/mark's%20510%20024.jpg

http://www.floridaracing.org/510/bodywork/mark's%20510%20012.jpg



step 2.75 - put out the fires you caused after heating up the opposite side of the metal

step 3- grind them

http://www.floridaracing.org/510/bodywork/mark's%20510%20021.jpg

http://www.floridaracing.org/510/bodywork/mark's%20510%20015.jpg


Thats one, now there are 63 left. Luckily I only have about 10-15 more to do.

One fender done. Where that fiberglass is, use to be a transparent hole.
http://www.floridaracing.org/510/bodywork/mark's%20510%20004.jpg

[paul kersey]

step 3.
dont finish car, sell.
thats the usual one anyway.

[marksaccord95]

omfg i dont finish 1 god damn car and mike, you and taylor all bitch from there on

accord- finished
green s14- finished
white rolla- finished
blue rolla- finished
SR20 corolla- didnt finish
reason i didnt finish sr20 corolla: found 510 chassis after years of searching, became priority since 2 other corollas had already been built.

[VolvoBoiClw]

good looking work man, when is it expected to be done?

[B18C5-EG]

Looks good so far. Cant wait to see the finished version.

[marksaccord95]

good looking work man, when is it expected to be done?


hopefully june-july, but i wont push it.

[Puto]

looking good so far. Good work pansy.

[Xiwei]

do you still want me to get one of those hydrolic ebrakes from ksport?

[satanshatch]

omfg i dont finish 1 god damn car and mike, you and taylor all bitch from there on

accord- finished - It was turboed with nothing else.
green s14- finished - You sold it a month after you owned it, nothing done to it
white rolla- finished - I give you that one. It was nice.
blue rolla- finished - You bought it finished. It was someone elses project.
SR20 corolla- didnt finish - Agree
reason i didnt finish sr20 corolla: found 510 chassis after years of searching, became priority since 2 other corollas had already been built.

:lol: all in good fun. Hell, every day I hate my s13 and want to sell it, and here I am buying a bigger turbo and manifold for it this month. :roll: Go figure.

[SpottedMango]

What motor's going in that thing?

[JC]

Looks good so far Mark. I really cant wait to see this done.

[marksaccord95]

What motor's going in that thing?


tard

[spoonfed]

looking good timmah!!

[REY]

Congrats on that awsome project and owning one of my dream cars.........

[nismokid]

get molested while welding :lol:

[REY]

What motor's going in that thing?

from the 1st post:

"S14 SR20"

[marksaccord95]

from the 1st post:

"S14 SR20"


he knows, hes just being a smart ass bc its his motor :lol:

[REY]

he knows, hes just being a smart ass bc its his motor :lol:



Oh.... LOL :lol:

[Kung Fu Grip]

I love 510's!!,yea This will be waaay better then what you were going to do with the chevy motor. :thumbup: :thumbup: :thumbup:

I've been trying to find A 67' corolla for three year's ever sense.. This girl I was going out With at the time had one(mint. one) in her yard (her dads friend's Car) I would sit there And drool over it for hour's..lol Sad thing is that he would not sell it for nothing. :(

Still havin't found one.

Bump!

[rexaholic7]

lol i rememba when i first saw that car on your shack last year. and to think i wuz gona do a 3 rotor turbo swap on it.

[Jordan T]

i cant wait to see this done.

[lunchbox]

i poop on your 510.. and 3 people have told me my rolla woulda walked the piss outta urs! hahahahahahahah

[lunchbox]

sorry im really being a douchebag <3 i still love ya .. oh and thanks for calling me back the otherday

[hondasux]

gsxr-kart= not finished

lol jk

[marksaccord95]

i poop on your 510.. and 3 people have told me my rolla woulda walked the piss outta urs! hahahahahahahah


HAHAHAHAHAHAHAHAHAHAAH yea right.

my 20v made 155WHP and ran a 14.8, let me know when u get there ;)

[lunchbox]

pffffffft

[marksaccord95]

cut up some sheet metal today to weld behind the large holes in my engine bay. after welding from behind, i then welded them from the inside. i got tired of doing them ( only 2 left) So I started on smoothing everything out for paint. Both fenders and hood are done.

http://www.floridaracing.org/510/bodywork/IMG_1752.JPG

http://www.floridaracing.org/510/bodywork/IMG_1750.JPG

http://www.floridaracing.org/510/bodywork/IMG_1734.JPG

http://www.floridaracing.org/510/bodywork/IMG_1753.JPG

http://www.floridaracing.org/510/bodywork/IMG_1736.JPG

http://www.floridaracing.org/510/bodywork/IMG_1737.JPG

[LongFellow]

looks good. keep the updates coming.

[$hawn]

Check out Mark's mad metal fabrication skilz :crack:

Please don't try this at home. (http://trmirror.rage-board.com/files/ScottsRaceStuff/Misc%20Stuff/Videos/TIMMAY.3gp)

[nismokid]

I love body work

[Puto]

wayto bring back a thread lol.

Go Wombats!!!

[rexaholic7]

horraaaaaaaaaaaayy!!!!

[S13_01]

wayto bring back a thread lol.

Go Wombats!!!

hell yeah, any updates on this car?

[marksaccord95]

updated.

i wasnt too concerned about how the welding inside the car looked since it was going to be covered with carpet.

http://www.floridaracing.org/510/051506/Picture%20001.jpg

http://www.floridaracing.org/510/051506/Picture%20002.jpg

http://www.floridaracing.org/510/051506/Picture%20003.jpg

http://www.floridaracing.org/510/051506/Picture%20004.jpg

http://www.floridaracing.org/510/051506/Picture%20005.jpg

http://www.floridaracing.org/510/051506/Picture%20006.jpg

http://www.floridaracing.org/510/051506/Picture%20007.jpg


http://www.floridaracing.org/510/051506/Picture%20008.jpg


http://www.floridaracing.org/510/051506/Picture%20009.jpg

[Jordan T]

lookin good. your good at too many things, cut it out.

[blurboEK]

Looks good, what happened to the 5.0?

-Mike

[sleeperEK9]

horraaaaaaaaaaaayy!!!!
you forgot the beer part horaaaaaaaaaaayyy beer!!!!!!!

Looking good mark cant wait to see it when the car is all done

[spoonfed]

lookin good slut.

[FC3Cturbo]

:lol:

[240sx=fast]

anymore updates on the progress?

[Superkaioken]

is that jeffs shop your doing this work in?

[rexaholic7]

you forgot the beer part horaaaaaaaaaaayyy beer!!!!!!!




you mean like this??

http://i32.photobucket.com/albums/d8/rexaholic7/hooray.jpg

[marksaccord95]

updates monday. its $hawns shop

[$hawn]

update... :mad:

[marksaccord95]

lol i didnt even know my car got painted til someone told me about this.

[Jordan T]

very nice

[Shadytrixta1]

haha i saw the pictures and said hey Mark your cars looking nice, he said "oh thanks" then a min later he was like "wait a minute is that painted?"

[REY]

OMGwettBUTTsekzORS

[Just Dave]

great color choice Mark. And your choice of painters is impeccable!

[$hawn]

It has paint on it! Sorry for the bad phone pix....I'll take beter shots tomorrow.

[marksaccord95]

bling

[Clifford]

Ya beat me... haha

[marksaccord95]

updated good shots tonight hopefully

[Projekt]

the car looks good man

[$hawn]

bling

so icy...

[marksaccord95]

bling?

http://www.floridaracing.org/510/painted/painted.jpg

http://www.floridaracing.org/510/painted/painted2.jpg

http://www.floridaracing.org/510/painted/painted3.jpg

http://www.floridaracing.org/510/painted/painted4.jpg

http://www.floridaracing.org/510/painted/painted5.jpg

http://www.floridaracing.org/510/painted/painted6.jpg

[SPOONCIVIC]

wow lots of work went into that and its not even close to done!

[dscivicdx]

wow, looks good! i love that paint color. cant wait to see it when its done, mark.

[marksaccord95]

finally an update right?

well its been sitting like this since i got the car back from paint. I sent my control arms off to heim joint/make them adjustable. Well 3 months later and having to threaten the guy to get my arms back, i finally got them over to Gabe at T3, and should FINALLY be back to me tomorrow-wed. Then by the end of the week hopefully my 11mm front control arm ball joints (i got the last pair left that NAPA sells) so I can get my front suspension back in.

http://www.floridaracing.org/510/090306/1.JPG


Today I finished up the front coilovers. Completely took them apart and sanded/painted everything that visible. Front coilovers consist of:

280zx front strut tubes
SW20 MR2 KYB AGX struts
Ground control weld on coilover sleeves
T3 roller bearing top hat
T3 camber plates
280zx Cross drilled/slotted rotora rotors
porterfield R4S pads

http://www.floridaracing.org/510/coil1.JPG

http://www.floridaracing.org/510/coil2.JPG


I also disassembled the rear drums to get them ready for my disc conversion. Have 10.125" cross drilled/slotted rear 280zx rotors and 200sx calipers for it. This week sometime I am going to slot the cross member, finish sand blasting it and then paint so I can get it ready to put back in.

Motor (sr20det) is almost prepped to go in. just needs a final rinse and paint

I really hope by Dec 1 to have this thing rolling, and maybe even have the motor in it.

[170k240]

balla!

[Shinmei2006]

nice!!!!

[REY]

looks like a ton of crap.!!!!!!!!!...


j/k- I'm just playa hatin on one of my dream cars

[$hawn]

Omg!

[Jordan T]

nice

[4wheeldriftS13]

lol, it makes me want a 510. datso ftw

[TNathe]

man, how sweet. It's the little details like spending days filling in holes that will make this car truly badass. When finished will one be able to see the the metal behind the front bumper that has the painted undercoating or whatever that ish is? If so I think it severely detracts from the finished car and should be smoothed over by removing the crap off that metal and repainting it. Other than that, this bish is gonna be magazine type of shit. :beer:

[marksaccord95]

maybe

there will be a nice big intercooler in that spot in the middle there to keep your eyes away from that area. ;)

[$hawn]

lookin good mark. when are you bringing up the cam cover?

[Griffin400]

looks good mark and nice work on the painting shawn

[marksaccord95]

tomorrow afternoon

[nissan4life88]

sooo nice man i love 510`s cool ass project

[marksaccord95]

bling?
http://www.floridaracing.org/510/arm1.jpg

http://www.floridaracing.org/510/arm2.jpg

[jabtay]

Damn...now that is gonna be a clean ass car.

[95gainfla]

wow, ive always loved 510's, and this one will definitly be one of my favorites. keep it up, and take your time.

[$hawn]

teh cam cover...

[marksaccord95]

weeeeeeeeee


shoulda gave u my intake manifold too, oh well.

[bigjaydogg]

cool

[Ronald Mcdonald]

Where are some more progress pictures. This car is fucking balla!

[marksaccord95]

been gone for 2 weeks.

came home today and i have 11mm ball joints! which means the suspension will go in it this coming week, should be rolling by friday.

need to:
put all the steering back in the car- steering box, drag link, tie rods, etc.
get recessed button alan screws for camber plates
put in front suspension, have everything now
push the car outside with my furnature cart for the rear suspension
jack up the car, sand, primer, undercoat under the car
slot my rear cross member
finish sandblasting rear cross member and 1 control arm and paint
assemble rear suspension/subframe


then the car can roll on its own for the 1st time ever since i owned it.

[REY]

Bro.. GOOD JOB.. Finally someone on here is able to DO IT RIGHT

[Clifford]

Awesome man, congrats.


BTW: Mark, I drove it for the first time today :)

[slowsohc]

Looking good so far Mark. Anymore updates?

[Paul]

SO bad ass!!!!

[marksaccord95]

entire left side suspension is in it as of today.

tomorrow the right side and steering will go in.

[Jus Skott]

damn that thing is going to be ppure sex when its done.

[Ronald Mcdonald]

damn that thing is going to be ppure sex when its done.

+1, I need more pictures of this thing. It's so fucking nice.

[marksaccord95]

got some stuff done today. For the 1st time since Ive owned the car, it rolls correctly on the front suspension.

entire front suspension is in. all brand new ball joints, all new mounting hardware, 280z front rotora slotted/drilled front brakes, everything adjustable. everything cleaned/sanded/painted. everything T3

im still unsure of these fender flares. keep in mind these are not the wheels ill be running, but 2" wider and a lot deeper offset. the main problem with running the flares is the fact I am going to have to cut up my freshly painted car, and then will be irreversable. so I am going to sit on the idea until the car is DONE.

Next week I am going to sand the whole underside of the car, primer and undercoat it. Then sand blast 1 control arm, finish sand blasting the rear subframe, slot the rear subframe, paint and then re install. The motor WILL be in by mid jan at the latest.

http://www.floridaracing.org/510/122106/IMG_1922.JPG

http://www.floridaracing.org/510/122106/IMG_1926.JPG

http://www.floridaracing.org/510/122106/IMG_1927.JPG

http://www.floridaracing.org/510/122106/IMG_1929.JPG

subframe flipped, drag link bent, ready for SR
http://www.floridaracing.org/510/122106/IMG_1939.JPG

[marksaccord95]

flares on the front

http://www.floridaracing.org/510/122106/IMG_1931.JPG

http://www.floridaracing.org/510/122106/IMG_1932.JPG

http://www.floridaracing.org/510/122106/IMG_1933.JPG

http://www.floridaracing.org/510/122106/IMG_1934.JPG

[Shadytrixta1]

Hmm not sure on the flares, but im happy to see some good progress finally!

[Ronald Mcdonald]

Those flares are fucking nice.

I vote keep those bitches!

[B18C5-EG]

T3 <3 i love my T3 coilovers ^.^

[$hawn]

LMAO @ the flares

[marksaccord95]

LMAO at your face

learn how to answer ure phone

[CivicRyda2k]

cute

[marksaccord95]

damn marc, 18 posts in 6 years? lol

[Ronald Mcdonald]

damn marc, 18 posts in 6 years? lol

Just another post-whore.

[Jordan T]

flares = gay

[Jus Skott]

im ehh on the flares. but i cant argue the fact if they are functionable.

[marksaccord95]

im not gonna run them. going to go with 15x7s instead.

[170k240]

nooo! get some fat ass 9's or 10's! balla!

[Ronald Mcdonald]

im not gonna run them. going to go with 15x7s instead.

Would those fit on an s13?

If so, I want them!

[marksaccord95]

ure more then welcome to try them out.

[Ronald Mcdonald]

ure more then welcome to try them out.

Sweet, maybe I'll try to stop by on wed.

[enjoi43081]

Shits gonna be soo quick !

[marksaccord95]

oh shit

as of 5:41pm today it rolls on all 4 wheels now.

no pics bc i sold my still camera, lol

motor to be in end of next week or no later then mid the following.

[$hawn]

windows gray or black?

[marksaccord95]

same color as the car please, just the metal, leave the rubber moulding around the outside of the frame black.

+ some touch up paint.

[Ronald Mcdonald]

Someone take pictures for this man, I NEED UPDATES!

[xnissan240x]

cant wait to see the car when its done

[marksaccord95]

me either, lol

[Driftz28]

I’ve been following this project for a while and I can’t tell you how frustrating it is to see good progress but no end result… Its like watching a really good movie and someone keeps turning off just before the end. Please get this thing done so I can see the finished result…

Excellent project! And keep up the good work!

[marksaccord95]

uhhhhh, where did i say i wasnt going to complete it? Motor goes in next week.

[Driftz28]

Was just busting your chops. I know good work takes time…

[marksaccord95]

yea it does, ive been working on it to some extent 4-5 days a week.

[B18C5-EG]

pics of new rims fool

[SaturnTypeR]

WHo makes those flares?

[marksaccord95]

some guy made the flares, and they are for sale.

no pics of the wheels on the tires yet, i dismounted the tires from the wheels so i can polish them 1st.

[REY]

what kind of wheels you decide on yet?
Flares are interesting.....

[marksaccord95]

15x7 rewinds in silver and my current 14s.

[REY]

Nice !

[marksaccord95]

just finished undercoating the tunnel. Now all I have to do is sand/paint my brake lines then reinstall them. After that, I just need to spend 2-3 hours finishing up the prep work on my SR and then stick her in. Projected install date for the SR is Saturday.

[marksaccord95]

undercoated tunnel. The car is now has about 85% of the new undercoating done.

i ended up taking the grill, headlight bezels, etc off and took them to get powder coated. Since its chrome, the paint doesnt stick well and I figured that powder coating should hold up better to rocks/bugs/etc

http://www.floridaracing.org/510/011307/IMG_2238.jpg

http://www.floridaracing.org/510/011307/IMG_2240.jpg

[shinmei2006]

thats very very nice....i'm tearing T.T up as i type this..

[Jordan T]

very nice yo

[spoonfed]

He is at our shop right now car looks great in person and the motor is going in as I type!

[Philly Blunt]

He is at our shop right now car looks great in person and the motor is going in as I type!

what shop? xat?

[Mars_302]

Dc

[marksaccord95]

arp head studs
cometic head gasket
hks 264 step 1s
rocker stoppers
oil pan
os giken twin plate
165-169PSI in every cylinder


http://www.floridaracing.org/510/011307/engine.JPG

http://www.floridaracing.org/510/011307/engine2.JPG

http://www.floridaracing.org/510/011307/engine3.JPG

[2g]

Its coming along nicely. Good job!

[hideinginfl]

looks good

[Griffin400]

woot woot

[Shadytrixta1]

Pushing a rolling shell a mile down the center lane of Hillsborough FTL!!!Motor slid right in though.

[sleeperEK9]

damn mark that shit is looking nice man

[vanillagorilla]

Mark, who modified your front crossmember?

[ON3GO]

gangsta dude.. pure sex

[Monkey Pox]

bro that bitch is do fuckin bad.. im a big fan of datson. your doing a great job love to see it on the road.. somtime soon. rep given

[trayfoe]

Looks good homo! You gots a pic of the dash piece you want glassed?

[ON3GO]

.. im a big fan of datson.


datsun....

[gritt]

man, that does look nice. I have a 69 510 waiting for me to go pick it up one day. i have to finish the z (right...) then I can start on the dime. hope it looks as good. i tried to get the guy to sell me his wagon but he wouldn`t go for it....

[Shadytrixta1]

I want an old school Datsun pick up, saw a few in Cophers but they were in bad shape.

[trayfoe]

I want an old school Datsun pick up, saw a few in Cophers but they were in bad shape.
http://a818.ac-images.myspacecdn.com/images01/3/l_973dd66a31c9f7a4753cdb3a47bb17b9.jpg

[marksaccord95]

bling

[$hawn]

come get this shit!!!!!!!:wink:

[marksaccord95]

thank you jesus

[BrewPuBeaver]

wow man....



looking very nice

[enjoi43081]

An RB25DET in that small as car ? Damn, I'd be scuured.

[Ronald Mcdonald]

An RB25DET in that small as car ? Damn, I'd be scuured.

Ummm....or it's an sr20.

[shinmei2006]

Ummm....or it's an sr20.

i think he meant the truck up there ^ but even so that motor looks like the RB26 with a single turbo...

[Shadytrixta1]

http://a818.ac-images.myspacecdn.com/images01/3/l_973dd66a31c9f7a4753cdb3a47bb17b9.jpg

Holy shit thats hot! But I think i wanna go a little older with the truck.

[shinmei2006]

^ do you ever work lol...seems like youre a computer monkey at DC lol...


j/k

[marksaccord95]

wow man....



looking very nice

you only saw it when it was the shell, right?

[Jordan T]

lats see pics with that valve cover on!

[marksaccord95]

just got it today, will take some pics after a bit

[marksaccord95]

http://www.floridaracing.org/510/011307/IMG_2741.jpg

http://www.floridaracing.org/510/011307/IMG_2743.jpg

[Shadytrixta1]

Ballin!!!

[DSM Dave]

damn mark it looks badass

[170k240]

kick ass

good choice on the top mount mani

[marksaccord95]

bottom mounts dont work on 510s due to the steering box

[170k240]

oh, got ya. well thats a plus i guess lol

[Projekt]

i just wet myself.

[Jordan T]

you know what mark???

nothing...

i hate you. :)

[marksaccord95]

my goal is to have it running before the end of feb.

really all depends on how long my custom made radiator will take to make.

[98SR20DE(t)]

Very clean job. I love the color choice.

[HellofaPrzeFghtr]

yum

[rexaholic7]

fucking sick ass. lol i remember when i was thinking of buying this to make it a 3rotor turbo. shit good fuckin luck on that dead line.

[will mccullough]

seriously that is a amazing job man. good luck with the rest. its nice to see someone who knows what theyre doing lol

[Shadytrixta1]

Car is at DC today for anyone who would like to see it first hand.

[shinmei2006]

saw it today...looks awesome...

[REY]

looks about 80% done.. Hey Mark do what you do best and sell it.......

LOL..... Sell it to MEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE

[marksaccord95]

hey, there is a price tag on anything

10k cash and its yours.

[Kung Fu Grip]

lookin' good!

[rexaholic7]

hey, there is a price tag on anything

10k cash and its yours.



do you take Monopoly money or LIFE money??

[dusty_wang]

ive been checking out the progress on the510realm.com, i wish mine was coming along as fast as yours

[marksaccord95]

florida 510s unite

[dusty_wang]

florida 510s unite

anyone else beside us two with 510s

[marksaccord95]

2 other people in tampa i know of, and i dont think anyone has a running one :lol:

[back2Nissan]

2 other people in tampa i know of, and i dont think anyone has a running one :lol:
yet!!! soon my friend,soon!

[marksaccord95]

yet!!! soon my friend,soon!


ya right, u been talking about putting together a 510 longer then ive actually owned mine :lol:

[nissan4life88]

saw it yesterday looks amazing good job man

[back2Nissan]

ya right, u been talking about putting together a 510 longer then ive actually owned mine :lol:
LOL!! Its like fine wine, it takes time and patience.

[dusty_wang]

2 other people in tampa i know of, and i dont think anyone has a running one :lol:

mine was running until i pulled the l16 out, the ka will be in soon

[Jordan T]

any more pics?

[ilida]

Mark, fangirl is back. If you still need to test wheels, my number is in your pms.

[enjoi43081]

I got a pic of it in my cell from when I whent to Driven Concepts...
Shit's soo much nicer in person.

[nissan4life88]

man mark its comming together nicely....i saw it at dc the other day

[+Waldo+]

steve ima have to ride with you so i can go see it, i wanna se all these DC projects in the back, that thing looks awsome man keep up the hard work man

[Durdan Perfab FTW!!!]

it will never be finished...

[+Waldo+]

it will never be finished...

mi no me gusta!!

[Mars_302]

it will never be finished...

:lol:

[Jordan T]

its soooo close to being done.

MARK! getter done fucker!

[gotricebih]

this car is hottness

[marksaccord95]

my fuel system should be in from the mail tomorrow, gonna order megasquirt on friday-sat

[ON3GO]

megasquirt! awesome dude!
im installing my like 10th one this week.

[marksaccord95]

had it on my 20v about 3 years ago, worked great.

[kablelinkDrifter]

damn dude that is one sic ass 510 omg!!!!!!!!!! cant weait too see that on the road

[marksaccord95]

all my fueling is here.

aeromotive reg and guage
earls inline fuel filter
summit 12 gallon cell
walbro 255lph inline pump

Tuesday after my dentist appointment im going to cut the spare tire well for the sump on the tank, measure all my lines and head to the aeroquip store in st pete.

[doodoobrown69]

damn dude that is one sic ass 510 omg!!!!!!!!!! cant weait too see that on the road
is it gonna be a street car?

[dusty_wang]

Mark i cant wait to see yours finished. Mine will be on the road by April/May.
I have the motor, Ka24de, I just need to get card manifold, carbs, dizzy and then wire the damn thing.
Did you convert to rack and pinion? I bought everything off ebay for 94 bucks?

[marksaccord95]

nah, its still a steering box with the reversed centerlink.

[+Waldo+]

...where is this project loceted? DC? such a bad ass work in progress! want to see it driving!!!

[Gooser]

saftey glasses ftmfw

[Clifford]

Is it going to be done before you leave? When are you leaving btw?

It's not at DC. Looking good man, keep it up!

[Shadytrixta1]

its at DC, I gotta walk around the turd everday day!j/k.

[JC]

Any aero plans?

[marksaccord95]

Is it going to be done before you leave? When are you leaving btw?

It's not at DC. Looking good man, keep it up!

its there to get some additional paint work done, i leave april 17th and i hope to have it running by then.

the aero will just be a BRE carbon fiber front lip that I have sitting here

[Santos]

its there to get some additional paint work done, i leave april 17th and i hope to have it running by then.

the aero will just be a BRE carbon fiber front lip that I have sitting here

looking good mark, but where are you going?

[170k240]

damn, anything happening with this right now? i kinda forgot about it lol

[marksaccord95]

moving to cali mid april.

piping/intercooler/downpipe crap.

[Santos]

Cali as in California? Nice, what for? job oppurtunities?

[Shadytrixta1]

2 words PowerBlock!!!

[mikespeed95]

parking in lots?

[marksaccord95]

yeap, finally a full time job doing what i love, photo/videography

[marksaccord95]

2 words PowerBlock!!!


eh?

[Shadytrixta1]

NVM someone must have told me wrong.

[170k240]

is this car gonna pash emisions? lol

i love florida :]

[Jordan T]

awww byebye mark

[ph0tek]

so we can close this thread about a project thats going nowhere?

cool.

next.

[marksaccord95]

so we can close this thread about a project thats going nowhere?

cool.

next.

read up there, just bc i dont have any updated pics doesnt mean nothings being done

no CA emissions for cars 75 or older ;)

[ph0tek]

no, not that nothing is being done to the car, the fucking car is staying in tampa...

your not taking it with you


itsa tampa car
not
ghey
ass
cali
car
.......

[170k240]

hahaha

[rexaholic7]

mark.............................................. .







i hate you.

[marksaccord95]

no, not that nothing is being done to the car, the fucking car is staying in tampa...

your not taking it with you


itsa tampa car
not
ghey
ass
cali
car
.......

yea yea i know. it will just be another 510 out there vs unique here, $12000 and you can own it, thats just what i got invested in parts....

[rexaholic7]

ill give ya fresh baked cookies along with my friend washington for it

[marksaccord95]

cookies? FUCK YEA

going to seans tomorrow for welding

[Santos]

nice, post updated pics.

[Mars_302]

cookies?!

[ganju]

it took me an hour and a half to read all 227 post and i think you guy just made a drifter out of me i love every bit of the thread and think the datsun is gorgeous g/l on the finish product and the new job in cali

[marksaccord95]

lol wow, i dont think ive ever spent that long reading a thread, thanks.

[marksaccord95]

sorry for the camera phone pics, i sold my SLR to upgrade and dont have my new one yet. Test fitting the rims with different tire sizes to see which one will work and shots of the intercooler

http://www.floridaracing.org/510/022507/img045.jpg

http://www.floridaracing.org/510/022507/img046.jpg

http://www.floridaracing.org/510/022507/img047.jpg

http://www.floridaracing.org/510/022507/img048.jpg

http://www.floridaracing.org/510/022507/img049.jpg

[Jordan T]

i know you got more than that seans been busting his ass on those pipes!

[marksaccord95]

when i was there this afternoon the pipes werent touched yet? i dunno, he said he will have all the piping and intercooler done for wednesday.

[Jordan T]

ohh poo. i was under the impression that he was near done with them. bad info.

[nissan4life88]

oh man i cant wait till this gets done...those wheels are hott by the way....

[robunicu]

very sexy bro. looks sweet

[marksaccord95]

wheels are now mounted with 4 brand new hankook RS2s

[Shadytrixta1]

Dont mean shit without pictures!

[marksaccord95]

pics coming sunday probably

[Jordan T]

car passed the deadline!

[marksaccord95]

sorry for the camera phone pics, ill have better ones tues-wed.

PS pulley has been cut off.

clearance from the IC to the front of the water pump is 4.2"

http://www.floridaracing.org/510/030507/img055.jpg

http://www.floridaracing.org/510/030507/img056.jpg


http://www.floridaracing.org/510/030507/img057.jpg


http://www.floridaracing.org/510/030507/img058.jpg


http://www.floridaracing.org/510/030507/img059.jpg


http://www.floridaracing.org/510/030507/img062.jpg

[JJFreshyZC]

Sick Bro!

[Shadytrixta1]

Looks awesome!

[170k240]

beautiful

[gotricebih]

its coming along nicely

[Jordan T]

fucking great

[+Waldo+]

Sex

[RydinSolo]

hey i beleive the First pic on the thread was taken at Nopi last year in bradenton or how ever u spell it?????am i right or not, i thik i remeber seein it there

[mikespeed95]

whoa cool another drift car thread with a car that wont drift!!

[Lookin2GoFA$T]

i wouldn't drift in that car. i'd roll around town picking up hot asses in it though.

[Jordan T]

yeah didnt you here? you can only drift LS1's because they're magical.