PDA

View Full Version : Look>Spark plug removal


J-Dizzle
04-08-2006, 11:13 AM
took these out last night, i think the oringinals from the swap , very nasty! hard to look at andthink my motor was running with thesze shits, well replacing them with the same NGK iridiums> anybody got any info on these plugs, fuggin $7 a piece ...and i know it obviuos but what will i expect after changing these? thanks.....i think im missing something that changing spark plugs do

jason

Orion ZyGarian
04-08-2006, 11:28 AM
Iridiums are a good idea for forced induction...if you like pissing away money on plugs that really dont do any better than anything else and get too hot under boost.

Get the OEM plugs. Theres a reason Toyota spent money researching and came up with the stock plug type. These were high end cars back in the day...if they had iridium plugs back then and found them to work, they'd use them
The white fuzz on the bottom of the plugs mean that it is the wrong heat range also btw.

J-Dizzle
04-08-2006, 11:47 AM
i see...interesting.....so which ones should i use?

J-Dizzle
04-08-2006, 11:50 AM
nevermind that i just ordered them from toyota $12 a piece

Orion ZyGarian
04-08-2006, 02:26 PM
Woah lol probably didnt have to spend that much...I've never spent more than $10 on all of my plugs together

Just find out what the stock type of plugs are for the 1G and get those...usually Denso/Bosch Platinums with an equivilent cross reference

J-Dizzle
04-08-2006, 02:32 PM
well i went the Oem toyota route...BIG DIFFERENCE!!!quiter and a shit oode quicker when hitting boost..came to $80 total ..oh well solves the problem

Orion ZyGarian
04-08-2006, 02:39 PM
well i went the Oem toyota route...BIG DIFFERENCE!!!quiter and a shit oode quicker when hitting boost..came to $80 total ..oh well solves the problem

Glad I could help though! I told you the Iridiums blew

J-Dizzle
04-09-2006, 01:53 AM
yea....i did alot of research also ..and found pretty much everyone saying they hate boost for some reason

Reign_Maker
04-09-2006, 04:21 PM
YIKES! O..o... orion... Iridium plugs are FANTASTIC plugs to go with, especially for high boost applications... Copper are great too, but you'll change them more than the iridium... Platinum are worthless in a boosted car, I had so much chatter with them, ping and misses... Iridium fixed that quickly... I paid $6 a piece for my NGKs at O'Rielys... I'll be breaking my motor in on coppers, but will be switching to Ir plugs after the break in... Anyway, Im glad you got your car running well... Im really glad you got those nasty plugs out... lol... YIKES! It looks like they were sittin in the open for a while...

Orion ZyGarian
04-09-2006, 10:18 PM
Pretty certain its quite the opposite...if a stock boosted car uses platinums, there may be a reason IMO. I've heard Iridiums just heat up too much under boost.

With your platinums, did you do the "for every 100HP over stock, add 1 heat range and .001" closer gap?"

Idealsupra
04-09-2006, 10:57 PM
Pretty certain its quite the opposite...if a stock boosted car uses platinums, there may be a reason IMO. I've heard Iridiums just heat up too much under boost.

With your platinums, did you do the "for every 100HP over stock, add 1 heat range and .001" closer gap?"

platinums suck...THE END...

Orion ZyGarian
04-09-2006, 11:17 PM
No offense, but until I find info otherwise I'm going to take Toyota's word over yours..

Idealsupra
04-09-2006, 11:21 PM
No offense, but until I find info otherwise I'm going to take Toyota's word over yours..

you do that....torque your hg to 56ft/lbs too
:roll:

Orion ZyGarian
04-09-2006, 11:28 PM
you do that....torque your hg to 56ft/lbs too
:roll:

:lmao: Good point!

J-Dizzle
04-10-2006, 10:15 AM
:lol: