PDA

View Full Version : FS:// 1990 Talon AWD *Pictures*

Ender.
03-28-2006, 06:52 PM
Back up for sale due to certian issues.

**Update** The bumper was completely taken off, it looks a lot better that way I feel.


Also brand new hankook tires all the way around, over 400 bucks w/ receipts ;)

Since I have owned the car I have fixed as much as time and money allow.

Main things wrong:

- Front bumper is red and held on by zip ties, drivers side headlight cover is missing as well as center grille. This is the main thing wrong exteriorly. Also has 2 new dents on the drivers side from people that cant effing park.

- Transmission: 1st gear has not worked since Ive owned it. Therefore there have been no launches ;), Brand new shifter cables have been put it in. More than likely the transmission needs a rebuild.


- Leaks a little oil: I have a new Valve cover and gasket that is going on when I get the chance.



Now if all that has not scared you off, on to the Good!

The belts have been replaced and no more squeaking, brand new Hankook tires with receipts, and the idle has been fixed and the BOV is properly recirculated.

Motor has 155 compression across the board.

Mods are as follows:

- Evo3 16g (Supposedly ported and clipped, I have never had it off to inspect it)

- Evo3 Manifold (Supposedly ported also, again I have never taken the time to look)

- K&N Filter

- No name 3" exhaust, looks like hell, but does the job.

- Autometer boost (0-35psi) and EGT Gauges mounted on dual pillar pod

- Greddy Turbo Timer

- Turbo XS boost controller (Not installed, I have been running stock boost)

- ACT 2100 Clutch

- KYB GR2s up front, 8 way adjustables in the rear.

- Megan Racing lowering springs (Uninstalled)

Everything brake related was replaced when I first got the car, about 5,000 miles ago. This includes all rotors, pads, calipers, master cylinder, and Road Race SS Brake lines

Interior is in pretty good condition, Exterior needs some work. A/C blows ice cold ;)

If there is anything else I think of Ill update it. PM me with any questions, if you want my number PM me for that as well. Ill get some pictures up when I get the chance.

Price is 2500 as it sits. As always money talks.

**** Update *****

Pictures:

http://www.tamparacing.com/photopost/data/500/101_0156.JPG

http://www.tamparacing.com/photopost/data/500/101_0157.JPG

http://www.tamparacing.com/photopost/data/500/101_0159.JPG

http://www.tamparacing.com/photopost/data/500/101_0160.JPG

Paint Flaws:

http://www.tamparacing.com/photopost/data/500/101_0161.JPG

http://www.tamparacing.com/photopost/data/500/101_0162.JPG

http://www.tamparacing.com/photopost/data/500/101_0163.JPG

Interior:

http://www.tamparacing.com/photopost/data/500/101_01641.JPG

http://www.tamparacing.com/photopost/data/500/101_01651.JPG

http://www.tamparacing.com/photopost/data/500/101_01661.JPG

http://www.tamparacing.com/photopost/data/500/101_01671.JPG

http://www.tamparacing.com/photopost/data/500/101_0168.JPG

Motor:

http://www.tamparacing.com/photopost/data/500/101_0169.JPG
fishnutts
03-28-2006, 08:59 PM
do you have any pics of it what color is the rest of the car
Ender.
03-28-2006, 09:18 PM
do you have any pics of it what color is the rest of the car

Pics are coming as soon as I get the chance to take them. Might not be till this weekend.

Car is black and grey, with the red bumper. interior is grey/black.
SLOWBOOST
03-28-2006, 10:59 PM
Matt if youll be at the meet, I have a recirc tube you can have.
RB240Mike
03-29-2006, 10:15 AM
Hey is the red paint on the bumper really good? If so I can get you a really nice primer black one and give you cash for it since my front bumper is a little beat up and I don't wanna have to repaint the bumper.
Ender.
03-29-2006, 10:25 AM
Hey is the red paint on the bumper really good? If so I can get you a really nice primer black one and give you cash for it since my front bumper is a little beat up and I don't wanna have to repaint the bumper.

Front bumper is cut for a FMIC and is kinda beat up. Im just going to grab a new one from Advanced when i get around to it.

Slowboost- Ill try to make it to the meet. If not Im just going to make one out of some home depot parts or something.
SLOWBOOST
03-29-2006, 08:33 PM
Yeah, the last car the bumper was on got front ended by a ditch...although it did have new paint on it before that happened.

You can also take a trip in the radiator hose section at the auto parts store, thats what I did a while back. If they are cool, theyll let you take some out to see which one would work. Tons of sizes and bends.
Ender.
03-30-2006, 11:53 AM
Yeah, the last car the bumper was on got front ended by a ditch...although it did have new paint on it before that happened.

You can also take a trip in the radiator hose section at the auto parts store, thats what I did a while back. If they are cool, theyll let you take some out to see which one would work. Tons of sizes and bends.

Good call.
Ender.
04-01-2006, 09:44 PM
Pics added.
Ender.
04-03-2006, 09:47 PM
Belts don't squeal anymore.

Remember people, obo. I want a 2g now.
Ender.
04-09-2006, 01:57 PM
ttt
Gst_LmJ
04-12-2006, 06:01 PM
bump :D
Ender.
04-12-2006, 11:05 PM
bump :D

Thanks!

I should be getting a black bumper this weekend and having it match. New pics will follow.
Ender.
04-19-2006, 12:33 PM
Finally getting some interest!
Ender.
04-25-2006, 01:14 PM
Im keeping the car for the time being.

Jordan you can lock this.
Dick
04-25-2006, 07:59 PM
I see you just posted about keeping it, but I might be interested as soon as I get the turbo kit sold for my car...
Ender.
04-25-2006, 09:39 PM
I see you just posted about keeping it, but I might be interested as soon as I get the turbo kit sold for my car...

Feel free to shoot me a PM if you are seriously interested. For the right price I could always reconsider...
Dick
04-25-2006, 10:17 PM
aight man. let me get this kit sold.
Ender.
04-26-2006, 08:59 PM
aight man. let me get this kit sold.


:crack:
Ender.
05-12-2006, 01:16 PM
Back up for sale!
Steez
05-12-2006, 05:11 PM
Ender there is a guy here at UTI that is looking for a AWD so I'll let him know, your looking to get $2500 correct? Also what is all wrong and still needs to be fixed?
Ender.
05-12-2006, 09:08 PM
Ender there is a guy here at UTI that is looking for a AWD so I'll let him know, your looking to get $2500 correct? Also what is all wrong and still needs to be fixed?

PMed.
REDchirp
05-14-2006, 11:50 PM
hey man, PM me bout all this shit when you get the chance...
Ender.
05-15-2006, 12:16 PM
hey man, PM me bout all this shit when you get the chance...

Ill call you when I am off work later today.
FC3Cturbo
05-15-2006, 06:25 PM
hey man are those awd talons kinda fast stock?
Ender.
05-16-2006, 11:00 AM
hey man are those awd talons kinda fast stock?

Completely stock? not really

With a few minor bolt ons and a boost controller they can be pretty quick.

Mine has a few upgrades though (Turbo, manifold, etc.) why would you ask?
REDchirp
05-23-2006, 04:36 AM
Bump for this mans cause ;)
FiLjAr4LiFe
05-23-2006, 12:12 PM
awesome value.
SLOWBOOST
05-23-2006, 07:29 PM
:lol: i guess that kid never bought it
Ender.
05-24-2006, 09:36 AM
:lol: i guess that kid never bought it

Haha he is still bugging me, I have just been busy. If I can he will come see it tonight.

Thanks for everyone's comments :)
Ender.
05-25-2006, 11:45 AM
Pending a sale I guess... unless someone wants to beat the offer of 2k.
JR.
05-25-2006, 12:12 PM
do u wanna sale the turbo xs boost controler???
Ender.
05-26-2006, 11:25 AM
do u wanna sale the turbo xs boost controler???

Id rather not, there are a few for sale elsewhere on here though.
Ender.
06-01-2006, 04:17 PM
Well the buyer backed out so I still have it for sale!
Ender.
06-24-2006, 03:02 PM
Sold.
SLOWBOOST
06-24-2006, 04:23 PM
finally :lol:
JR.
06-24-2006, 08:07 PM
About Damn Time How Much Did U Let It Go For?