FORGED 355 SBC 1.94 Iron Vortec heads Performer RPM Intake

[EliteZ]

Forged pistons and a mild cam. Heads and Intake were taken off the car today, they are GM 1.94 valve Vortec Iron heads, with matching Performer RPM intake. Has Late Model Centerbolt style valve covers(stock height). Was looking to get 1000 OBO for the setup. I will keep the stock oil pan and Carb. but rest will go. Was running when in my blazer, lookin to invest this in my other motor being built.

So basically, you can see what ur getting, and you just need head gaskets and intake gaskets to put the motor back together.

Will get Engine Code and possibly pics upon request. But I don't think u need pics for a motor. Its painted black. polished intake.

Willing to Sell Heads/Intake seperate. 600 OBO-Negotiable, no lowball.

Engine with 4:30 gears 3600 stall and 700R4 Transmission ran best of 8.11 in 87 S10 Blazer.

[Suicidal Racing]

hey how much for just the short block,whats all foged on the engine just the pistons?is it internaly balanced.what was the compresion on the engine with what size cc head.if the pistons are dome are the a solded dome where i can cut valve reliefs in them?

[EliteZ]

Well I bought the motor in another car. This is my first time taking it apart. I will look further this weekend, when I prob pull the motor. It has forged double valve-relief flat top pistons. But I researched the heads previously, and found this site
http://chevyhiperformance.com/howto/97458/
which told me it was 64CC.

[Sneakin Deacon]

tossed you a pm on RX john.

[EliteZ]

yeah, gotcha. returned at RX.

[EliteZ]

ttt

Will take 400 cash for Vortech heads/intake.

[Suicidal Racing]

more info on the short block and hoe much also any trades?

[Pennywise]

would you take $800 for the just the block..... i dont need the tranny or gears dont think i need the heads either...also is everything torn apart on the block or everything still togther

[EliteZ]

Taking the motor out of the car today so I will get back to you on info. I am building another motor and really only need money. But I will need a Victor Jr Intake and 1.5 7/16 stud RR's.

Jester 800 for just the shortblock? or did you mean to say heads/intake/bottom end? b/c I think 800 is a little much for just the bottom end shortblock with cam.

But Bottom end is still completely assembled. will be torn down, with cam pulled, heads off, oil pan off, etc. but rotating assembly will be left alone. Update later.

[Pennywise]

well all i need is the bottom end, the block, rods, crank,pistons,etc.i can use my heads and intake that i have.i have a 83 camaro with a runing 355 in it right now.. but i want to spray it and i would like to have a forged bottom end before i do so just let me kno what you want for just the bottom end only if you will make me a deal thats sounds good just PM me with the details

[Suicidal Racing]

well i got a roller cam motion cam.roller lifters and a set of push rods right now.i got a set of heads and intake but i'm asking 3,300 for them

[Pennywise]

well i got a roller cam motion cam.roller lifters and a set of push rods right now.i got a set of heads and intake but i'm asking 3,300 for them

what are you askin just for the roller cam,lifters and push rods?

[Suicidal Racing]

pm sent

[EliteZ]

Got motor apart. Its a ARP Studded 2-bolt main cap setup. Balanced steel crank/rods. Forged pistons.

It had (has) a .413 lift Comp cam.

Engine code is 3970010 which is a 69-79 350 2/4 bolt Car/truck/corvette motor. All is in good condition, and appears new.

I got some other offers on RX for 700. So Jester I'll take 700 for shortblock. if thats alright PM me your number.

Its kinda first come first serve, so whoever has cash in my hand first will get it. Thanks for interest.

[EliteZ]

Bump.

250 For intake/heads and will throw in very mild hydraulic comp cam with lifters and stock rocker arms.

[EliteZ]

Bump

[EliteZ]

To the top. 700 with heads/intake and cam.

[Pennywise]

hey sry man i can't buy the stuff from ya i ran low on money,but i hope you get rid of it somehow, maybe if you still have it when i get my tax return back i will buy it.good luck with the sale

[EliteZ]

Thanks man for posting up. How long till tax return?

[Pennywise]

bout 3 weeks

[EliteZ]

I need it gone hopefully in 5 weeks or less, So don't forget about it, doubt any body else will want it.

[Pennywise]

kool i will let you know, so what all will i get if i give you $700

[EliteZ]

Give me 800 and you will get everything cept the oil pan, carb and pushrods. Youll get bottom end oil pump/Heads/cam/lifters/stock rockers/heads and intake. and the splayed main caps.

This is still first come first serve if anybody else wants, unless you want to put a deposit down? Lmk. Have a good Super Bowl Sunday! :D

[Pennywise]

Give me 800 and you will get everything cept the oil pan, carb and pushrods. Youll get bottom end oil pump/Heads/cam/lifters/stock rockers/heads and intake. and the splayed main caps.

This is still first come first serve if anybody else wants, unless you want to put a deposit down? Lmk. Have a good Super Bowl Sunday! :D

damn thats a good deal, i will get the money soon as possable

[Na306StAnG]

I have cash a friend want it call me 727 667 9346

[Na306StAnG]

I needed this weeks ago Please call me ASAP 727 667 9346 I have cash in my back pocket.

[EliteZ]

Awaiting your call back.

[EliteZ]

ttt since people can't get there money together, where is that tax return!

[MOORESPEED12]

Could you please give a price list on everything if you were to part it out. Thanks,

Tony

[EliteZ]

Sold Heads today. 650 FIRM for complete shortblock assembly+oil pan/timing chain cover. Other than that, I am not gonna take apart shortblock.

[Pennywise]

ttt since people can't get there money together, where is that tax return!

lol sry man i dont kno either i will let you kno tho but i hope you can sell it thats a damn good price sux the heads are gone but what can you do i will let you kno if you still have it,i hope i get my money in time

[Lvcien]

PM sent... let me know.

thanks.

[EliteZ]

lol sry man i dont kno either i will let you kno tho but i hope you can sell it thats a damn good price sux the heads are gone but what can you do i will let you kno if you still have it,i hope i get my money in time
Sorry I was talking about "Na306StAnG " not you, but it would be nice to get your tax return aswell, so you could get this thing.

You also said about 3 weeks from the 4th. That would be this week, unless they are late sending it to ya. So let me know.

[EliteZ]

Any luck with that Jester?