Looking for a rebuild....

[Chris C.]

I have finally come out of denial with the fact that my box is ugly and needs to be recarpeted.

But, I am thinking I need to have the box rebuilt also. I have (2) 12" L7's, A Kicker SX1250.1 amp, and a 1.5fd Tsunami cap. I am tired of having a box thats just sitting in my trunk. I don't think there will be enough room but, I want to know if there is a way to fit all of these components in an arrangement closer to this:
http://gallery.thevboard.com/showpic.php?dispsize=Original&album=OptikalIllusions/newpics&pic=newrearClose.jpg

The only difference may be that I would have a false floor for the amp and cap. My current setup has the amp and cap mounted to the enclosure and I don't like the idea of that. Plus, I want everything flush mounted and "stock" looking instead of the giant box sliding around in the back. (Figure of Speech)

Here is the current box and setup :
http://www.tamparacing.com/photopost/data/500/medium/PA260011.JPG
http://www.modifiedcartrader.com/UploadedPics/2005/10/2857_Nissan_Sentra_10182005102713AM4.jpg
http://www.tamparacing.com/photopost/data/500/medium/PA260013.JPG

P.S.- I don't need anybody telling me to change my components. This is what I have and I went with them for a reason. I don't need anyone saying I should get new components. Thank You.

[CHUPA_CABRA_2.0]

I will help you rebuild it you want

[CHUPA_CABRA_2.0]

let me know i can build just like the top picture i can show you my focus in a couple of days and you tell me what it the min and max air space sealed for those or do you want ported?

[Notladstyle]

Build the box first then put the false floor in front of the box with the space you have available.

The false floor will be the easy part, gettin the subs the way you like will be the task to complete.

[Bumpin Expo]

wheres the sub at

[GradeA_TireFryer]

I would face the sub forward so you can see them if you layed the back see down.
them port it thru the rear deck
flush mout your amp and cap and finish off the truck
i would make sure the box was seal tight to the frame behind the rear seat and the ports thru the rear deck
not allowing and sound into the trunk

[neondriver]

i have made a couple simple enclosures with a false floor. check out my car domain page for some pictures. one is a single 15 facing in the car with the amp and a component system flush with the wall.http://www.cardomain.com/ride/285867/2

[Notladstyle]

i have made a couple simple enclosures with a false floor. check out my car domain page for some pictures. one is a single 15 facing in the car with the amp and a component system flush with the wall.http://www.cardomain.com/ride/285867/2

Thats a pretty clean setup, but whats the point of mids in the trunk? Also, whats up with the 800 posts and red box?! with clean work like that u need to be in the green bro

[neondriver]

the mids were back in the day when i use to go to car shows and opened the trunk they made the highs louder. i had extra 6.5's laying around so i figured id use them somewhere.