VWFREFF
11-08-2005, 06:13 PM
I have decided to move onto better things and I must parts the laser out. Everything on the car has 150 miles on it. Everything is in new condition. The list of everything is as followed:
**92 Plymouth laser AWD shell - no motor/tranny/transfer case... the shell has everything else. 91 GSX front seats, Brembo xdrilled/slotted rotors w/92-94 big brakes up front. Shell is in decent condition $900
**91 6 bolt motor rebuilt w/new rings, bearings, pistons, reconditioned big rods, balanced/blue printed, arp mains/rods/head bolts, head is reconditioned w/new valves & ports were cleaned 950
**91 Galant GVR4 tranny w/100k miles. Shifts fine w/no grinds SOLD
**Garret T4 57trim w/P trim wheel & bullseye exhaust housing, T04B compressor cover. The turbo will bolt to any mitsu style manifold. Turbo has absolutely no shaft play and is it excellent condition. Come w/oil feedline & filter.Turbo is set up for o2 mounted wastegate $750
**Evo III manifold $150
**2.5" tubular o2 housing w/38mm tial wastegate. Its in great shape $350
By the whole setup for 900
**Custom 3" intake pipe, w/2g mas & K&N filter $140
**JRC 30x8x3 FMIC w/custom short route piping, greddy flanged, all 2.5" piping, comes w/FP couplers & t-bolt clamps, j-pipe for mitsu turbos, piping eliminates the TB elbow as well, all mandrel bent 600
**Greddy type RS BOV for the FMIC kit SOLD
Buy it all for550
**RC 550 injectors $135
**Walbro 255 HP SOLD
**Prothane motor mount inserts w/mounts $100
**NGK blue wires $35
**Apexi 2.5" downpipe SOLD
**Greddy *trust* counter weight shift knob SOLD
**Autometer black dual gauge pillar pod $20
**Autometer Phantom boost gauge 30-30 readout comes w/everything needed for install SOLD
**Autometer Phantom A/F gauge comes w/everything needed for install $40
**Autometer Procomp Ultralite EGT w/probe & black box $90
**Custom Powdercoated JDM Valve Cover. This is a one-of-a-kind valve cover that was send to Procoat and costed over $200 for just the coating. You have to see the valve cover in person to appreciate the quality of work that was put into it. The color is called dusty desert bronce(Lancerman TE37 volk color) w/black lettering & red mitsu symbol. Again, this is a one-off valve cover $125
**7cm housing off an EVO III 16g (set up for external gate)$50
**ACT 2600 w/ACT streetlite flywheel & SS clutchline $450
**6 bolt Arias 8.5:1 .020. 400 miles on them $200
I also have a ton of misc for sale as well. PM me for details. All items listed above are OBO but please, no silly lowball offer and serious buyers only. Will be willing to give package deals for multiple items that are bought. If you want to buy everything, The price is $4000 OBO!
If you have any questions about anything, you can contant me on my cell phone @ 813-924-2978 or John*LS1Fever* @ 813-758-1056.
**92 Plymouth laser AWD shell - no motor/tranny/transfer case... the shell has everything else. 91 GSX front seats, Brembo xdrilled/slotted rotors w/92-94 big brakes up front. Shell is in decent condition $900
**91 6 bolt motor rebuilt w/new rings, bearings, pistons, reconditioned big rods, balanced/blue printed, arp mains/rods/head bolts, head is reconditioned w/new valves & ports were cleaned 950
**91 Galant GVR4 tranny w/100k miles. Shifts fine w/no grinds SOLD
**Garret T4 57trim w/P trim wheel & bullseye exhaust housing, T04B compressor cover. The turbo will bolt to any mitsu style manifold. Turbo has absolutely no shaft play and is it excellent condition. Come w/oil feedline & filter.Turbo is set up for o2 mounted wastegate $750
**Evo III manifold $150
**2.5" tubular o2 housing w/38mm tial wastegate. Its in great shape $350
By the whole setup for 900
**Custom 3" intake pipe, w/2g mas & K&N filter $140
**JRC 30x8x3 FMIC w/custom short route piping, greddy flanged, all 2.5" piping, comes w/FP couplers & t-bolt clamps, j-pipe for mitsu turbos, piping eliminates the TB elbow as well, all mandrel bent 600
**Greddy type RS BOV for the FMIC kit SOLD
Buy it all for550
**RC 550 injectors $135
**Walbro 255 HP SOLD
**Prothane motor mount inserts w/mounts $100
**NGK blue wires $35
**Apexi 2.5" downpipe SOLD
**Greddy *trust* counter weight shift knob SOLD
**Autometer black dual gauge pillar pod $20
**Autometer Phantom boost gauge 30-30 readout comes w/everything needed for install SOLD
**Autometer Phantom A/F gauge comes w/everything needed for install $40
**Autometer Procomp Ultralite EGT w/probe & black box $90
**Custom Powdercoated JDM Valve Cover. This is a one-of-a-kind valve cover that was send to Procoat and costed over $200 for just the coating. You have to see the valve cover in person to appreciate the quality of work that was put into it. The color is called dusty desert bronce(Lancerman TE37 volk color) w/black lettering & red mitsu symbol. Again, this is a one-off valve cover $125
**7cm housing off an EVO III 16g (set up for external gate)$50
**ACT 2600 w/ACT streetlite flywheel & SS clutchline $450
**6 bolt Arias 8.5:1 .020. 400 miles on them $200
I also have a ton of misc for sale as well. PM me for details. All items listed above are OBO but please, no silly lowball offer and serious buyers only. Will be willing to give package deals for multiple items that are bought. If you want to buy everything, The price is $4000 OBO!
If you have any questions about anything, you can contant me on my cell phone @ 813-924-2978 or John*LS1Fever* @ 813-758-1056.