PDA

View Full Version : 03 ranger door panel


NT_Hardcore
10-12-2005, 01:01 AM
i want to replace the door speakers, how do i get the door panel off? iv never tryed to take it off just wondered if anyone has done this b4....thnx

kpr10is
10-12-2005, 01:35 AM
post a pic of your door and ill be able to give you general directions.

DANGERANGER
10-18-2005, 12:07 AM
remove the trim piece around the handle 2 phillips or 7mm i forget. pop it off should be one more behind there and maybe one on the bottom rear of the panel. once screws out panel pulls straight up not out.

NT_Hardcore
10-18-2005, 12:49 AM
how does the window arm come off?

Bumpin Expo
10-21-2005, 12:12 AM
Look around the handle on the inside of the door to pop the door open. There are 2 screws rite under the handle, take them out. Pull the plastic trim off that goes around the handle. Grab the bottom of the door and pull the door straight out on the bottom only. After the whole bottom half of the door is popped off, pull the rest of the trim straight up.Make sure your windows are down. If you have power, unplug the plugs for the switches

DANGERANGER
10-21-2005, 10:55 AM
how does the window arm come off?
The cover snaps loose on the handle. pry at base and will snap loose swing out of way and a t20 holds on handle.

NT_Hardcore
10-21-2005, 02:16 PM
thnx