List your 60' time and suspension mods

[plan Z]

thought it would be interesting to see what 60' times you all are getting and what kind of suspension mods and tires.

my best so far
1.697

S/T shocks/struts and Sprint springs
Poly bushings (sway bars, end links, torque arm, and tranny)
Nitto 555R 245/45/16

ps-can i get some rep points for starting a thread since i never do and dont have any:)

[Skittle]

2.0

Stock suspension

215/40's

[$hawn]

1.704.....All stock except for FRPP lower springs( not the best for drag launches:)).sway bars and all.

[Duceanahalf]

2.33

stock suspension
4000#
3.27 gears
27in tires

[$hawn]

^^^4000# Bro, I'm not too far behind:lol:

[Little Nicky]

2.0
stock suspention
2:73 gears

[Slo_Si]

1.88 Eibach lowering springs, old setup 255-265whp....

[DriftingDJ]

1.6 on M/T ET streets HICAS stock rear suspension, megan racing coilovers up front

[Scott]

1.41 60ft's on M/T Slicks.


Rear:

Trick springs
Homemade drag shocks
Southside Lower Control Arms
UPR Double Adjustable Uppers
Rear Sub Floor and Torque Boxes Welded

Front:

Stock springs
Lakewood 90/10 Drag Shocks
Sway Bar Removed

All stock mounting points.


It did run 1.65's with all stock stuff, front sway bar removed, and slicks.

[Suicidal Racing]

1.44
on 26x10x15 slicks with bmr torque arm,drag launch springs with air bag.

[Tits McGee]

Bone stock.....2.2......should be more like 1.8....but I hate drag racing.

[Strokd85]

1.29
wolfe anti-roll bar
single adjustable uppers
chasis engineering lowers
3 way adjustable rear shocks

front;
Lakewood 90/10s w/coilovers & 14" springs (don't remember the rate right now)
tubular k-member
tubular a-arms

[TIM TIM TIM]

ha... 2.2 on baldys

[24-7]

Bone stock.....2.2......should be more like 1.8....but I hate drag racing.


Thats not too god for 4wd.

[LSJ_Kid04]

2.1 w/ sprint springs , everything else is stock

[ryu]

2.2 eibach springs, kyb agx set on stiffest setting, Nitto NT-555's

Wheelhop ownz me:P

[???]

years ago(8-10 lol) did a 1.77 on worn out yokohama's. on all stock stuff even the swaybar still on..


i never really liked the track but i still think that was the most fun I've had there.

I've had it on slicks only time, did 1.5 something but that was just coming out soft and spraying early. more of hp 60ft time than a launch


oh and did a 2.0 on the bike the first night out. ahhahaha sad but it was hard and took me 4 or 5 runs to just get that...lol

[Jap]

1.91

stock susp , 2 year old 225/50/16 NT555R's

[EliteZ]

1.47 J-bolts, 8.8in 10 bolt. MT 28W Slicks (78 Camaro) 2.037-LT1 Z28 Stock, Street Radials.

[Tom N]

1.65
stock suspension.
Stock 205/55/16 tires.

[primetime1267]

This past weekend @ BMP I pulled a,
1.46 launching at 5000 RPM on the spray

rear:
ET Drag 26" slick
Lakewood 50/50's
Lakewood UCA & LCA
Stock rear springs

front:
Lakewood 90/10's
Moroso drag springs
front sway bar-gone-

cant wait till track day.................

[curtg21]

1.7 with slapper bars and drag radials

[qitstrn]

1.6 Coilovers

[uncle bens wildrice]

2.0 kyb's coilovers and bald bfg's

[Slo_Si]

1.6 Coilovers

damn, not bad....1.6 is pretty damn good for fwd turbo...seen your new times...congrats...

[qitstrn]

damn, not bad....1.6 is pretty damn good for fwd turbo...seen your new times...congrats...Here is the funny part. I pulled 1.6's on 22x8 slicks and now i'm on 26x10's and still cant pull under a 1.6. The best i have personally seen was allmotor hondas pulling 1.5's. This weekend a T/A pulled a 1.4 on mickey thompson Dr's at the track. :-o

[BigBadBuick]

1.61 best, stock, stock, stock, 26x10 slicks :dunno:

[04compgt]

1.55 with 26x10.5x15LT M/T ET STREET's , no front sway bar, stock shocks, stock rear suspension, 8.8 rear end, 28 spline moser axles, repacked posi...launching at 5000 rpms on spray :)

[fadedSTi]

1.81 bone stock suspension

[gje94z28]

1.55 with boxed trailing arms and ET streets.

[myltwon]

2.19 stock suspension, street tires

[RBTALLY]

1.65 with et streets on stock independent rear suspension

[plan Z]

1.65 with et streets on stock independent rear suspension
what car

[Boostin97SE-R]

1.786 on stock suspension (independant) and 305/35/18 nitto 555r

[fadedSTi]

1.81 bone stock suspension

i was on stock street tires also

[rennteknik]

1.8's H&R's, Bilsteins....

[vlevick]

Best 60' so far is 1.60 for my '01 Mustang GT convertible. I have Eibach lowering springs, Maximuum Motorsports caster/camber plates, Southside bars, frame connectors, 4.10 gears and 26 X 10 MT ET Drags. I also have removed the front sway bar. Last night was the first night I have had it out with the new engine and it ran a 7.21. The car was shifting "wierd" all night (automatic). I didn't figure it out until I was on my way home, I forgot to push the button to turn off the overdrive. Duh?!@#! I can't wait to take it out Friday night to see what it will run with it shifting like it is supposed to!

[Steve B]

1.41 before front end coil over conversion and tubular mess. rear had ssm lowers and motorsport uppers on a M/T ET street drag radial. 1.39's here i come.

[dan]

1.96 on 235 bfg dr's w/~12psi (1st time)

IRS
f&r sway bars (going to disconnect the rear next time)
spl subframe collars
j30 viscous lsd (3.90 gear)

[DriftingDJ]

1.96 on 235 bfg dr's w/~12psi (1st time)

IRS
f&r sway bars (going to disconnect the rear next time)
spl subframe collars
j30 viscous lsd (3.90 gear)

j30 diffs are different than the viscous lsd

[dan]

j30 diffs are different than the viscous lsd
nope its still an R200v part.

[Silver35thGT]

1.35 on MT drag Radials,325/50/15 at 3400lbs..Double adj uppers,chromoly lowers,anti rollbar,stock rear springs with QA1 shocks,front is stock except for eibach drag springs and strang adj struts... That was this past Saturday at Bradenton...Anyone get a pic of the car????Its a red and silver 88gt with a chute...thanks Roger

[Ender.]

1.81
Stock Suspension
All weather Kumhos

This was in the GVR4.