fender roller 4 rent

[spike35]

I have an Eastwood fender roller for rent that I have used personally on my own car (97 240sx). Its bolts to the hub and will also flare fenders if you wish. $50 to rent but requires a $300 deposit which covers the cost if not returned or damaged. Contact DJ @ 407-314-3963.

[mranlet]

50 bucks is a bit steep, especially when compared to a baseball bat... You got any pics of it or the work that it can do?

[teddy]

50 bucks is a bit steep, especially when compared to a baseball bat... You got any pics of it or the work that it can do?

Many 'shops' will charge you ~$40-50 PER corner. $50 is MORE than reasonable considering you can take all the time you want and do all 4 corners, and even go 1/2 on it with a friend.

And you're asking pics of 'what it can do' or some of its 'work', yet say it's expensive compared to a baseball bat. If you don't know how the fuck a fender roller works, then how can you compare? Get a clue man, seriously.

Quit being a cheap ass.

[SpottedMango]

I think $50 is very reasonable, considering that the tool costs over $250 and you will probably only use it once.

TTT

[ag04]

The eastwood roller is great from what I've heard, many people use it, and some, like this guy on zilvia, rents it out across the entire nation. I've never used one, but $50, and a $300 safety deposit is completely fair. It's cool that your helping out the community by doing this.

ag04

[Hella Slow]

Many 'shops' will charge you ~$40-50 PER corner. $50 is MORE than reasonable considering you can take all the time you want and do all 4 corners, and even go 1/2 on it with a friend.

And you're asking pics of 'what it can do' or some of its 'work', yet say it's expensive compared to a baseball bat. If you don't know how the fuck a fender roller works, then how can you compare? Get a clue man, seriously.

Quit being a cheap ass.


i think the question was ment to be:::: show pics and see if its worth spending the $$ or just do it with a baseball bat.

i would like to see what this device does and i don't mean how it works but the quality of the work vs. my own fender rollin skillz!

i've rolled atleast 8 cars in the last year and i think i do it good but if this device is better it might be worth buying/renting..and pics will tell..


_Jason

[mranlet]

i think the question was ment to be:::: show pics and see if its worth spending the $$ or just do it with a baseball bat.

i would like to see what this device does and i don't mean how it works but the quality of the work vs. my own fender rollin skillz!

i've rolled atleast 8 cars in the last year and i think i do it good but if this device is better it might be worth buying/renting..and pics will tell..


_Jason

This is more what I meant. I m sorry if I came across as a dick, it wasn't my intention, and I do think its also cool that there is someone with the willingness to put it up for rent.

I know what fender rolling is, and have done my share of it. I was interested in seeing pics of the quality of work because there are some terrible fender rolling machines out there (worse than a bat even) that will mess up the fender pretty bad.

Its been a years since I last rented a fender rolling tool, and my saying that it sounded steep was compared to how I remember it and compared to the cost of renting another big expensive tool (like an engine hoist, that can be had for little or no deposit and $20/week).

[mranlet]

What ever happened to this offer? Still good? Has anyone tried it out?

[satanshatch]

#1 you can NOT properly roll fenders with a baseball bat UNLESS you mean to just roll the inner fender so the wheel dosen't rub.

#2 I wouldnt roll s13 front fenders. Their cheap/thin as fuck and will crinkle.

#3 I have my rears HELLA rolled and it took me the better part of a few hrs to roll them and it was worth it. Although someone was nice enough to let me use theirs for free. Yes my paint chipped from the rolling and I have a few little creases (to be expected with the ammount of flair I have.. nothing that won't be covered soon anyway ;) .. but all in all I like mine. There mean looking.

[steve]

#1 you can NOT properly roll fenders with a baseball bat UNLESS you mean to just roll the inner fender so the wheel dosen't rub.
#2 I wouldnt roll s13 front fenders. Their cheap/thin as fuck and will crinkle.

to #1 yes you can
#2 sil fenders are really thin metal u.s stock one's are fine to roll

[satanshatch]

to #1 yes you can
#2 sil fenders are really thin metal u.s stock one's are fine to roll

I wanna see someone roll their fenders and make them look like mine w/ a baseball bat.

#2 - your right... I forgot not everone else has sil fenders.. they are really thin. I wasn't thinking of usdm fenders.

[hachibill]

i need to roll my corolla's fenders. my rear rubs.

[mranlet]

Steve - when you rolled yours, did it tear up the paint?

I'm talking about rolling to eliminate rub, I wouldn't try to flare with a bat :D

[mranlet]

I think that this is the machine that is being refered to:
http://www.eastwoodco.com/images/us/local/products/detail/p16482.jpg

Looks cool, more controlled than a bat, but does essentially the same thing...

[Silvia_San]

i'm poor bats rock...

[mranlet]

This is the machine I'm talking about:
http://www.weddingaccessories.net/images/gifts/1987_baseball_bat.jpg

[John]

b7\^/, 4|\|y0|\|3 l0c4l |\|33d1|\|g 7h15, 1 h4v3 0|\|3 4|\|d 1 c0m3 70 y0u, 54m3 p|21c3, |\|0 5h1pp1|\|g, |\|0 d3p0517 |23qu1|23d :) 1'll 3v3|\| 5h0\^/ y0u h0\^/ 50 y0u d0|\|'7 g37 4|\|y u|\|d351|23d 3ff3c75. Ju57 53|\|d m3 4 PM.

[JC]

John, do you have pics of what kind of work this machine produces. I just want to see some results of using it.

[John]

\^/3ll 1 h473 70 c0|\|71|\|u4lly p057 p1>< 0f my \^/h0|23d 0u7 c4|2, bu7 17 |234lly g1v35 y0u 4|\| 1d34 0f \^/h47 c4|\| b3 d0|\|3 1f y0u \^/4|\|7 70 |2u|\| l0\^/ 0ff537 \^/h33l5, 54|\|3 4m0u|\|75 0f c4mb3|2, 4|\|d |\|0|\| 57|237ch3d 71|235
7h15 15 my cu|2|23|\|7 537 up, 18><10 +11 0ff537, 255'5, 4|\|d 0|\|ly -2 c4mb3|2
h77p://\^/\^/\^/.74mp4|24c1|\|g.c0m/ph070p057/d474/500/m3d1um/9595P1010004.JPG
h77p://\^/\^/\^/.74mp4|24c1|\|g.c0m/ph070p057/d474/500/m3d1um/9595P1010003.JPG
my 0ld \^/h33l5, \^/h1ch \^/3|23 flu5h \^/17h 7h3 570ck f3|\|d3|25, 18><10+40
h77p://\^/\^/\^/.74mp4|24c1|\|g.c0m/ph070p057/d474/500/m3d1um/95951010068.JPG
h77p://\^/\^/\^/.74mp4|24c1|\|g.c0m/ph070p057/d474/500/m3d1um/95951010065.JPG
h77p://\^/\^/\^/.74mp4|24c1|\|g.c0m/ph070p057/d474/500/m3d1um/95951010064.JPG

|\|0\^/ k33p 1|\| m1|\|d 7h15 15 4 v3|2y 3><7|23m3 pull (4b0u7 25mm) 7h47 4l50 h4d b0dy \^/0|2k d0|\|3. 1 h4v3 |\|07 533|\| 4|\|y f3|\|d3|25 pull3d 45 much 45 m1|\|3 0|2 45 cl34|\|ly, bu7 7h15 15 |\|07 f0|2 m057 p30pl3. 17 74k35 4 l07 0f 71m3, 3ff0|27, p4713|\|c3, 4|\|d pl4|\||\|1|\|g f0|2 17 70 c0m3 0u7 l1k3 7h47. 5m4ll3|2 pull5 up 70 15-17mm c4|\| b3 4cc0mpl15h3d \^/17h |\|0 b0dy \^/0|2k, 4|\|d d3p3|\|d1|\|g 0|\| 7h3 4g3 0f y0u|2 c4|2, |\|0 p41|\|7 c|24ck1|\|g.

7h47 15 4|\| 3><4mpl3 0f 4 pull. 1f y0u 4|23 51mply \^/4|\|71|\|g 4 |20ll, 17 15 much 34513|2. 1 d0 |\|07 h4v3 4|\| 3><4mpl3 0f |20ll3d f3|\|d3|25, bu7 1f y0u l00k 47 y0u|2 570ck f3|\|d3|25, y0u \^/1ll 533 1|\| 7h3 f3|\|d3|2 \^/3ll, 4 l1p 3><73|\|d5 1|\|\^/4|2d5. 7h15 15 7h3 p0|2710|\| 7h47 15 |20ll3d, 4|\|d g1v35 y0u 4b0u7 3-5mm 0f 4dd1710|\|4l cl34|24|\|c3, pl3|\|7y f0|2 m057 p0pul4|2 \^/h33l 4|\|d 71|23 537up5. Y35, y0u c4|\| d0 7h15 \^/17h 4 b453b4ll b47, bu7 y0u 1|\|c|23453 7h3 |215k 0f p41|\|7 c|24ck1|\|g 4|\|d |21ppl1|\|g \^/17h 7h15 m37h0d. 7h3 3457\^/00d d035 7h15 much m0|23 g3|\|7ly, 4|\|d 4ppl135 m0|23 3v3|\| p|2355u|23, 4|\|d 175 much f4573|2 45 \^/3ll.

H3|23'5 4 p1c 0f 17 1|\| 4c710|\| b3f0|23 my c4|2 \^/45 p41|\|73d:
h77p://\^/\^/\^/.74mp4|24c1|\|g.c0m/ph070p057/d474/500/m3d1um/9595031><.JPG

l37 m3 k|\|0\^/ 1f y0u guy5 h4v3 m0|23 qu35710|\|5 0|\| 7h15!

[steve]

Steve - when you rolled yours, did it tear up the paint?

I'm talking about rolling to eliminate rub, I wouldn't try to flare with a bat :D

nope just take it slow

[steve]

I wanna see someone roll their fenders and make them look like mine w/ a baseball bat.

#2 - your right... I forgot not everone else has sil fenders.. they are really thin. I wasn't thinking of usdm fenders.

yeah if you sit on those fender wrong you have a dent

[craig_302]

Mine are pretty thick thanks to 40 layers of paint and body filler, I don't know what thin is.

[lunchbox]

hell nissan fenders will dent if you look at them wrong..