More parts today...I'm happy

[davcivic]

Equal length header
http://img224.echo.cx/img224/4749/dcp026169st.jpg

http://img224.echo.cx/img224/2231/dcp026177fr.jpg

Turbo XS Utec
http://img224.echo.cx/img224/2016/dcp026193wf.jpg
The guy I got it from had a tuned map, with the same parts I'm installing, except I'm going to be running larger injectors and he was putting down 300whp in a mustang dyno, and ran a best of 12.5 with the stock clutch. I'm hoping for similar numbers

[Frankie Figs]

what kinda header is that?

[davcivic]

gp moto

[mranlet]

How much did the header run you after shipping?

[davcivic]

I picked it up from a guy in Orlando, only $300. It sells for $700 and then the guy had it coated, an extra $200. So i saved about $600

[FastRaft WRX]

your car is goin to be crazy sick bro

[davcivic]

I hope so. I'm going to begin the installation today. We'll see how it goes, hopefully I can finish tonight.

[Frankie Figs]

your car is goin to be crazy sick bro

Define "Crazy Sick" http://home.earthlink.net/~brief/brownnoser.gif :lol: J/K

With a good tune it should be pretty quick. Do you have an upgraded IC yet?

[davcivic]

Yes, greddy fmic

[fadedSTi]

nice setup. cant wait till it comes to life. keep up the goodwork man :)

[Franklin]

Bring that bad boy to Sonic this Saturday. Me teh wantsz to see. omg omg

[davcivic]

If I get it all done and tuned I'll try to be there.

[fadedSTi]

If I get it all done and tuned I'll try to be there.

whos doing the tuning?

[I'm Slow]

Cft, He Bought The Headers And Utec From My Friend.

[davcivic]

yes, cft

[Green]

yes, cft



let me know wheen your going i meet you there i live 10 min a way

[Frankie Figs]

I can't wait to get my car over to CFT and get the AEM done :D You should be able to make around 300whp. Well idk if their dyno will give you 300whp, but Mastro's will. Their dyno reads 15% lower since its a Mustang Dyno,

[kickslop]

davcivic: Good luck with the project. I think 300WHP would be an absolute max you might see with a VF22 on 93 octane, but dynos are a lame judge of capability anyway IMO. You'll likely be happy with the setup, and that's all that matters.

[davcivic]

They told me 300whp on their dyno was pretty much what I would see. If I add a nitrous intercoler cooling thingy it might add another 15-30hp

[kickslop]

:thumbdwn: for intercooler chiller "bang for buck" and headache