what sized turbo for my 3.2L v6?

[Josiah]

pretty much just wondering what you think, its an SHO motor that will be running a max of 15psi this engine can rev to 8000RPM so I dont want turbos that are gonna run out of breath up top, I am personally thinking twin t3s, also open to a good single turbo size...other info on the motor compression ratio 10.5:1 3.2L 24V DOHC V6 engine which on stock 9.8 compression produces 220HP or so, I am aiming for 500 with race gas on 15psi and 10psi on pump gas

[Cecil]

If your findings lead towards a T28, I have an old one.
It was making 330hp at 15psi on my 1300cc bike (stock it was around ~150hp).
It was estimated produce 360hp at 20psi... so it's probably not what you ar looking for.

Good luck.
Do you have a thread to your project?
I would be interested in following it.

[NChatch]

go with something a little larger like an SC50, or SC61.

[Josiah]

no thread, need pics first so I can show some progress, otherwise people will just say how it cant be done, etc, thanks for the suggestions though

[Josiah]

I am now thinking twin 14Bs from 1st gen DSMs....they ought to suit my desired boost levels well

[DeadSexY]

+1 on sc61 with a v6 you can spool that sc61 like noting.