AmysBAD98GT
03-15-2005, 09:32 AM
Howdy everyone... Im Amy. I used to live in Clearwater and found this site.. thought I would jion up since I come down a lot. Ive got a couple rather fun toys..
1998 Mustang GT 542.98 rwhp Procharger Car and soon to come home a 2004 Hayabusa. Here is some of the mods on the 98 gt. and also.. Ill post some updated pics in ca couple weeks after I get her back. I have a 10pt. cage , 31 spline axles, battle boxes, powerpipe, vortech bypass and some other things that were just added this winter.. but other than that here is the list of all the other junk on her.Modifications:
Houston Performance Blower Motor!
Pullies/Belts:
RR Blower pulley 3.2in
RR A/C Delete Kit for 8 rib (adjustable)
all other pullies are a custom 8 rib kit designed for ProCharger cars (about 725 bucks total)
Belt: Gates 114.5 longer for ProCharger cars
Bottom End:
Totally forged bottom end, with a cobra crank, Eagle rods, JE dished pistons.
Heads:
Accufab intake and throttle body (70mm)
PI stock lower intake (cant wait for that to go)
PI race ported heads
Ferrea oversized valves
Comp Springs
HP 292R Billet Race cams
Cam Specs: @.550./292./114
(Does it lope...Hell Ya!!!)lol
ARP HD studs
Billet oil pump gears
FMS oil pump
Canton 7 qt race pan w/ windage tray
Umm lets see what else...oh yeah.
D-1SC 4.6L Race Kit with 3 core sheetmetal intercooler.
RR Pulley 3.2in.
MSD DIS-4 ignition (which still needs to be tinkerd with)
Exhaust:
BBK Long tubes
BBK H pipe
2 Chamber Flowmasters with tail pipes
(soon to be full 3in exhaust)
Air/Fuel:
Pro-M MAF 80mm
Full fuel system...
Aeromotive -8AN and -10AN lines
Aeromotive regulator
Steeda fuel Rails
Bosch 360lph pump
sumped tank
Aeromotive filters...
#50LB injectors
Stuff to make it move:
Tremec Bellhousing (need lakewood )
Spec 3 clutch
Fedenza Aluminum flywheel (yuck)
TKO tranny
Steeda Tri-Ax shifter
Rear End/Suspension:
ALL STOCK...WAITING FOR IT TO SHOW ME HOW MUCH IT LOVES ME ON DRAG RADIALS...LOL
Comments:
I put down 542.98rwhp at Kauffman Motorsports in PA. Last year in June.. Awesome place awesome people. I am taking the car back to be retuned here soon so I can pull those cams to the RPMs for which they were made for. And make the right numbers I need to be making...plus just got the MSD on so shoud do a lot better.Future Plans:
Well finally got the ProStars 15x3.5s up front 15x8s out back with a ET street tire (26x10.5) and Mike Gonzalas got the cage done...(10pt) So Ill post updated pics here within the next couple weeks. Hoping she will put down 650+ when done.. powerpipe was added, battle boxes, 31 splines and some other goodies.
VERY NICE TO MEET EVERYONE!:) :)
1998 Mustang GT 542.98 rwhp Procharger Car and soon to come home a 2004 Hayabusa. Here is some of the mods on the 98 gt. and also.. Ill post some updated pics in ca couple weeks after I get her back. I have a 10pt. cage , 31 spline axles, battle boxes, powerpipe, vortech bypass and some other things that were just added this winter.. but other than that here is the list of all the other junk on her.Modifications:
Houston Performance Blower Motor!
Pullies/Belts:
RR Blower pulley 3.2in
RR A/C Delete Kit for 8 rib (adjustable)
all other pullies are a custom 8 rib kit designed for ProCharger cars (about 725 bucks total)
Belt: Gates 114.5 longer for ProCharger cars
Bottom End:
Totally forged bottom end, with a cobra crank, Eagle rods, JE dished pistons.
Heads:
Accufab intake and throttle body (70mm)
PI stock lower intake (cant wait for that to go)
PI race ported heads
Ferrea oversized valves
Comp Springs
HP 292R Billet Race cams
Cam Specs: @.550./292./114
(Does it lope...Hell Ya!!!)lol
ARP HD studs
Billet oil pump gears
FMS oil pump
Canton 7 qt race pan w/ windage tray
Umm lets see what else...oh yeah.
D-1SC 4.6L Race Kit with 3 core sheetmetal intercooler.
RR Pulley 3.2in.
MSD DIS-4 ignition (which still needs to be tinkerd with)
Exhaust:
BBK Long tubes
BBK H pipe
2 Chamber Flowmasters with tail pipes
(soon to be full 3in exhaust)
Air/Fuel:
Pro-M MAF 80mm
Full fuel system...
Aeromotive -8AN and -10AN lines
Aeromotive regulator
Steeda fuel Rails
Bosch 360lph pump
sumped tank
Aeromotive filters...
#50LB injectors
Stuff to make it move:
Tremec Bellhousing (need lakewood )
Spec 3 clutch
Fedenza Aluminum flywheel (yuck)
TKO tranny
Steeda Tri-Ax shifter
Rear End/Suspension:
ALL STOCK...WAITING FOR IT TO SHOW ME HOW MUCH IT LOVES ME ON DRAG RADIALS...LOL
Comments:
I put down 542.98rwhp at Kauffman Motorsports in PA. Last year in June.. Awesome place awesome people. I am taking the car back to be retuned here soon so I can pull those cams to the RPMs for which they were made for. And make the right numbers I need to be making...plus just got the MSD on so shoud do a lot better.Future Plans:
Well finally got the ProStars 15x3.5s up front 15x8s out back with a ET street tire (26x10.5) and Mike Gonzalas got the cage done...(10pt) So Ill post updated pics here within the next couple weeks. Hoping she will put down 650+ when done.. powerpipe was added, battle boxes, 31 splines and some other goodies.
VERY NICE TO MEET EVERYONE!:) :)