View Full Version : 240sx parts for sale
hachibill
02-16-2005, 11:01 AM
now that my swap is done i need to clean out my garage lots of stuff for sale
s14 ka24de, complete with all accesories and tranny only has 115k miles on it
(SOLD)
s13 ka24de engine, engine needs rebuilt, but is a 91 and is complete,has no oil pressure, $50
hotshot header for s13 new design, (SOLD)
rome tuned s13 ka ecu set up for z/maxima maf,370's, (SOLD)
ka fuel rail with SR 370cc injectors already installed with new o rings, SOLD!
s14 ka into s13 conversion engine harness, lets u use s14 internal coil, (SOLD)
s13 ka ecu's $50
single cam and twin cam ka MAF's $25 each
1 s14 radiator $40
1 ka24de flywheel that has been redrilled for the SR clutch, can run either SR or ka clutches, $100
custom short intake tube for relocated intake on KA comes with couplers, SOLD!
2 front s13 tokico blue struts with cut stock springs, comes with matching rear springs, $40
all prices are obo, have lots of other stuff, just ask.
satanshatch
02-16-2005, 01:34 PM
Hey Bill.. talk to Tim about the KA hes looking for a long block I think...
Mike
paul kersey
02-16-2005, 01:57 PM
hmm oh yeah, i do need a long block.
if its still around in a week or so, ill buy the blown motor.
even though i really only need the head.
box240mod
02-16-2005, 10:37 PM
my buddy bill, im very interested in the motor/tranny for $350 and price is cool but whats the story on helping me swap it into my chassis? id help out of course, but i dont have the tools nor the know how to do it alone.... wiring?! and all that is not me....not yet atleast. there would be compensation, negotiable of course lol.... my engine on its last leg and i need to get something going...
mendozasport
02-17-2005, 09:34 PM
i need the injectors and fuel rail ...sent pm ..please contact me
agentAndy
02-18-2005, 12:13 AM
motor and trans is sold i believe.
wilp99
02-18-2005, 02:12 PM
do you still have any trannies left? i need one asap.
SlinkWays
02-18-2005, 02:19 PM
still have the 2 front tokicos? if you have a dohc gauge cluster that would be cool too. AIM me.
hachibill
02-18-2005, 11:50 PM
my number is 941-545-0747. if all of you guys wanna call me some time on sunday we can arrage a time for you all to pick up what your looking for. i live in bradenton but can drive to meet half way or soo.
box240mod
02-19-2005, 05:01 PM
im good for the offer bill, i can just get a factory clutch to run the setup tho right? i dont need anything about that right? let me know when ur free...
hachibill
02-19-2005, 05:11 PM
yeah, a stock ka clutch willwork fine.
u can get an exedy clutch cheaper then OEM at www.clutchcityonline.com
their store is in largo!!!! do it!!
sucio
02-19-2005, 07:01 PM
i want that short intake..i can drive to you
hachibill
02-20-2005, 10:04 AM
well its sunday so if anyof you guys wanna drive down today to come get what you want. just give me a call.
sucio
02-20-2005, 12:41 PM
Bill ill be picking up the injectors for that guy in orlando and the intake for myself.
weds-fridays are the only days i have off..
let me know when i can swing by and pick them up..thanks
wilp99
02-21-2005, 08:01 PM
tranny worked great... thanx alot for hookin my boy up.
hachibill
02-21-2005, 08:28 PM
no prob. i found a stock clutch and fly wheel if he still needs it. its used but it will work.
wilp99
02-22-2005, 11:57 AM
naw his other one had bout 70% left on it. we just used it. id rather of put a new one in but he didnt have too much lute.
hachibill
02-25-2005, 11:02 AM
i also have these 2003 sentra SE wheels for sale all 4 are in very good condition with 4 bran new tires. $200 for the set. size is 15x6. i would run these all the way around but 15's won't clear my front brakes.
launch
02-25-2005, 11:44 AM
i also have these 2003 sentra SE wheels for sale all 4 are in very good condition with 4 bran new tires. $200 for the set. size is 15x6. i would run these all the way around but 15's won't clear my front brakes.
You use the brakes?
hachibill
02-25-2005, 10:10 PM
i have 97 Q45 front brakes, which are bigger than z32 brakes, just twin piston instead of 4 piston.
hachibill
02-26-2005, 06:02 PM
i should be up in tampa tueday so if anyone wants anything let me know and i'll bring it with me!!!
J-Dizzle
03-01-2005, 09:59 AM
bill i need the short intake possibly the header and the s14 radiator will fit in a s13 correct? lmk
jason
hachibill
03-02-2005, 12:45 AM
still have the s14 radiator, let me know when you need it buy, or buy my whole motor and put it in your car.
J-Dizzle
03-02-2005, 10:43 AM
well im checking out a motor today with 71k on it (93)...but im not installing it in my car i think imjust going to include the motor with the sale of my car >because ive had about 5 offers on my car in the last 24hours:D but ill let u know what happens
jason
hachibill
03-04-2005, 08:59 PM
i also might be selling my drift wheels and tires. all 15inch and good for lower power cars, i have 3 full sets of wheels and more than enough 15inch tires.
1 full set of (4) 2003 sentra SE wheels, with 4 bran new tires, 4lug, 15x6 pics in this thread, $200
2 full sets of (4), 8 total s13 SE's with good tires $100 for 4
lots of drift tires, 15's,16's and 17's
235/45/17's x 4 $30 each donlup fm901 x3/ sp sport 8000 x 1
205/55/16's x 6 $25 each continental ch95/ sp sport 8000
195/55/15's x 11 $15 each michelin/ falken/ kumho
205/60/15 x 2 $15 each bridgestone
195/60/15 x 4 $10 each regent/ mxv4
205/55/15 x 2 $10 each fulda extremo
have more just ask, all tires are garunteed good and have good tread left
sidehappyside
03-05-2005, 02:09 AM
BILL! i want the radiator for my s13, i haev a jb welded one now and i dont wan to blow another head gasket. Ill buy it !
AbortRetryFail
03-06-2005, 03:49 PM
what color is the interior? and how's the driver's side door panel look?
hachibill
03-08-2005, 08:42 PM
^^^ what? i have no interior for sale.
Kung Fu Grip
03-11-2005, 12:29 AM
do you still have a complete motor for sale ... s14 ka?
LongFellow
03-11-2005, 02:19 PM
I need a duel cam s13 MAF sensor if you still have one.. thanks
steve
03-11-2005, 02:35 PM
i have one pm me
agentAndy
03-12-2005, 12:41 AM
INTERCEPTION!!!!!!!!!!!!!!!!!
Nice steal steve.
steve
03-12-2005, 03:31 PM
hahahah
hachibill
03-12-2005, 05:44 PM
if anyone needs anyhting i will be in tampa tomarrow (sunday) so give me a call and let me know what you want so i can bring it with me, like the radiator or the MAF. steve, your gay, go put power steering in your car. or go on walkabout.
box240mod
03-13-2005, 01:20 AM
well im in largo so heh... i dunno ill get in touch with you
AbortRetryFail
03-13-2005, 12:00 PM
^^^ what? i have no interior for sale.
Hahaha just checking. oh well.
Jeremy2792
03-13-2005, 02:04 PM
HachiBill, I sent you a PM a couple days ago. Please get back to me asap.
Thanks man. :bigthumb:
hachibill
04-06-2005, 11:06 PM
udated list of stuff. also have a almost comeplete black s13 hatch interior for sale. and complete s13 a/c system too, with either ka or SR compressor.
wheels and tires too!!
P_Productions
04-07-2005, 02:28 PM
HOw much for the A/c system?
if you fall upon a rear hatch PM me, also pm me the lowest for the struts and springs, thanks Bill.
hachibill
04-07-2005, 10:04 PM
HOw much for the A/c system?
um with which compressor? KA or SR?
hachibill
04-07-2005, 10:05 PM
if you fall upon a rear hatch PM me, also pm me the lowest for the struts and springs, thanks Bill.
i might know of a hatch i'll look, but for the struts, comeon $40 is nothing. heheheh
ka24de
04-07-2005, 11:20 PM
im trying to get ahold of a rear end so i can have it welded i dont want to weld mine an find out i hate it cause i heard mixed reviews about it.
IF you can find me a hatch reasonably priced you have a buyer for your struts and springs... how hard are they to install. check PM also Bill.
P_Productions
04-08-2005, 09:56 AM
With a KA compressor......but in case I don't need a compressor how much without.
Thanks
Ichi-go
04-10-2005, 08:16 PM
How low are those springs?
hachibill
04-11-2005, 08:57 PM
um, for the a/c i'll take $100 for everything, and yes i have paypal.
vBulletin® v3.6.10, Copyright ©2000-2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by
vBSEO 3.2.0 RC5